|
Title: WBA 13 ID024 3.80 Post by: Jason P on April 09, 2013, 03:44:06 PM Hello all. I'm a newbie to this site but have learned a lot from it. Thanks to everyone!!!! I have a S+ machine that didn't have a bill validator in when I got a WBA 11 for it as it already had that power supply. It worked but didn't take the new $5. I got a WBA 13 on eBay that said it was for an S+ , however when I got it it was a ID 024. It didn't work ( cycled but no bezel light) He said it would work if I cleared the machine. From what I learned on here this is not the thing to do. Any help would be greatly app. I certainly will be making a small donation as this site is a lot of help!!!!!! Thanks!!!
Title: Re: WBA 13 ID024 3.80 Post by: CVslots on April 09, 2013, 03:53:35 PM My notes say S+ only accepts a ID022 or ID023...hopefully, for your sake, that's not true?
Title: Re: WBA 13 ID024 3.80 Post by: Neonkiss on April 09, 2013, 06:36:28 PM No it will not work for the S+
Talk to your vendor and advise him that IDo24 is for the S2000 not the S+ Also note that there is no software for the ID023 of the S+ that will take the new $5.00 You can buy a WBA12 from Jim at Blueridge that is flashed to IDo23 and will take the new $5.00 but only avaliable in the flash version. |