|
Title: aristocrat mk6 xp restarting Post by: eon on April 13, 2013, 07:31:28 AM I have an Aristocrat mk6 xp board.
The machine restarts after "Program loading verification ok" I've tried several set of eproms but still the same problem. Can anyone suggest what might be causing this? (http://s21.postimg.org/jkmdvy853/error.jpg) Title: Re: aristocrat mk6 xp restarting Post by: eon on April 16, 2013, 07:36:41 AM Today it's starting up and I get the error "LAB board disconnected"
I still have no idea what's going on Title: Re: aristocrat mk6 xp restarting Post by: fonsolewis on April 20, 2013, 04:53:00 PM Sounds like you have a bad comms board. Swap it out and see what happends. Although I do get that when my boards are not properly conected to the backplane.
Have you been swapping out boards recently, or doing a conversion ? Title: Re: aristocrat mk6 xp restarting Post by: jasongd on May 11, 2013, 09:51:00 PM I agree,
The Lab comms may not be sitting properly in the backplane, Also check the jumper wires on the Lab comms board have not broken from the ports, Make sure all 6 are seated on the correct pins. , each link block is the same. If that fails, replace the Lab comms board. Cheers. Jas. |