|
Title: Bally s6000 Bill Validator Help Post by: hrussell007 on April 20, 2013, 04:16:33 PM Hello, I'm new here and hopefully i get this in the right place.
I bought a "In the Money" Bally S6000 made 2001. Machine worked perfect, then I accidentally changed a setting which then required a SafeRam Clear. Ordered the chips and did the clear. Got all settings the way I wanted them and machine is working again with the exception of the Bill Validator. It lights up, it pulls in the money, but then spits it back out. Any and every bill tried. It did work just fine before clear. The only setting I changed after the clear was coins to credit and all wins to credit rather then spitting out quarters after every win. Hope this is in right area and that I gave enough information. Thank you in advance for any help anybody may provide. Title: Re: Bally s6000 Bill Validator Help Post by: FORDSBS on April 20, 2013, 04:28:47 PM Did you try pulling cash can out & back in & pull validator & reseating it?
Title: Re: Bally s6000 Bill Validator Help Post by: hrussell007 on April 20, 2013, 04:38:06 PM Thank you for your response. Yes I pulled them both out several times and still no luck
Title: Re: Bally s6000 Bill Validator Help Post by: FORDSBS on April 20, 2013, 04:44:26 PM did you move DS2 5&6 which is for type of bill acceptor?
Title: Re: Bally s6000 Bill Validator Help Post by: FORDSBS on April 20, 2013, 04:47:19 PM What kind of bill acceptor do you have?
Title: Re: Bally s6000 Bill Validator Help Post by: hrussell007 on April 20, 2013, 04:48:52 PM Manual says DS2 #5 on & #6 off for a WBA. I just went and confirmed thats what they are set at.
Title: Re: Bally s6000 Bill Validator Help Post by: FORDSBS on April 20, 2013, 04:51:13 PM settings are correct
Title: Re: Bally s6000 Bill Validator Help Post by: lindam1 on April 20, 2013, 05:13:13 PM If the BV does nothing when installed, pull it out and make sure the plug in the back upper left corner is not broken away from the mount. If you push the BV in hard you can brake it. Always push it in firmly but not fast. I broke one slamming it in.
Title: Re: Bally s6000 Bill Validator Help Post by: hrussell007 on April 20, 2013, 11:19:46 PM it does do something. The lights work, when you insert a bill it pulls it in, then 2 seconds later it spits it back out. I have tried dozens of bills
of all denominations. Title: Re: Bally s6000 Bill Validator Help Post by: lindam1 on April 20, 2013, 11:43:59 PM I'm gona assume you've cleaned the read sensors on the head
Title: Re: Bally s6000 Bill Validator Help Post by: hrussell007 on April 22, 2013, 05:58:14 PM Well I gotta thank people for trying to help, but I have found the problem.
As much as I dont want to admit this :279-, I somehow got the settings for the denomination set to $25.00 rather then 0.25. Once I got the DIP switches set correctly everything is back up and working properly. For the record I did get 2 other error codes in the process of getting it back up. One was a 91FF and other was a 91NC. Both were corrected with DIP switch settings and a SafeRam clear. |