|
Title: RGB Polygon Topper Power Supply Post by: macfog on April 21, 2013, 08:28:51 PM I have this RGB Polygon Topper that I turned into a stand alone custom sign for work. does anyone know if anyone makes a plug in the wall power supply to power this up, When I check the power on the 4 pin molex connector on the power distribution board I get 12 vdc on the top two pins and 25vdc on the bottom two pins. I tried hooking them up to separate power supply's but get nothing. Any help or suggestions would be appreciated.
Thanks Macfog Title: Re: RGB Polygon Topper Power Supply Post by: buzzarama on July 30, 2013, 04:24:39 AM Does the topper work if plugged into the game? If not, it may not have a flash on it. If it has the grid style led board it usually won't work until its flashed. The chaser lights are the same.
Should be 12vdc 3amp David Title: Re: RGB Polygon Topper Power Supply Post by: macfog on July 30, 2013, 09:31:41 AM Hi Dave ,
Thanks for the reply. As it turns out, I ended up tying the two commons together and the two hots together and tried hooking them up to a 24volt DC laptop power supply, It works great so I ended up buying a 2 prong male & female molex connector and now have a permanent plug in connection. You just have to make sure on the polarity. Thanks Macfog |