|
Title: Sigma sg-50b (NEED HELP) Post by: Slotfxr on March 18, 2009, 05:31:04 PM Hi all, I have a brain teaser Question. I have a client that has an old Sigma sg-50. And YES, it still works. The problem was that the main CPU board fried. My client had sent it in for repair. Well she was told that it was no good and that they had a spare. She bought it and works perfectly, except the Jumpers were wrong. The're the type of jumpers that need to be soldered. The Machine is locking up on 200 coin pay-outs....She needs to have the game to pay out 1000 coins, and she cant copy the old board because they tossed it :25- So does anyone know what the jumpers are to be set at? Need help, Thanks.
Title: Re: Sigma sg-50b (NEED HELP) Post by: Jim on March 19, 2009, 12:10:18 AM Hope this will help Jim
Game optioning switch settings are at SW1 on previous machines there was a dip switch pack now they hard wire the settings on the solder side of the board. So positions 3 and 4 determine the max. amount of coins the hopper will dispense during a payout. #5 Play mode, on= credit only, off = player selectable. Title: Re: Sigma sg-50b (NEED HELP) Post by: Slotfxr on March 19, 2009, 12:08:21 PM Jim, your awesome!!!! :131- Thanks so much. I hope in all good time I can repay you. This site is really, truely a Life Saver!!!
|