|
Title: S2000 Sound Problem Post by: therockinelvis on April 25, 2013, 05:15:46 PM One of the two top speakers are not working. When I switched the plug it changed sides. The bottom speaker is working. Will this be a sound board problem? I have used an ohm meter and there are no shorts between the board harness and the speaker plugs. Jim
Title: Re: S2000 Sound Problem Post by: Yoeddy1 on April 25, 2013, 09:25:37 PM Are you using a multimedia lite sound board and a Sound SIMM? If not, mono sound is normal and you'll be missing sound out of one speaker.
Jason Title: Re: S2000 Sound Problem Post by: therockinelvis on April 25, 2013, 10:50:31 PM Thanks Jason. It seemed strange that they would put two speakers and only power one. I think I will tap into the other so at least it is doing something.
Title: Re: S2000 Sound Problem Post by: Yoeddy1 on April 25, 2013, 11:22:20 PM If you get the MML board and a SIMM that speaker will come to life. Assuming those parts aren't already installed on your MPU of course.
Jason Title: Re: S2000 Sound Problem Post by: erbs on April 25, 2013, 11:25:51 PM I has the same problem with several machines. Here is what I did. http://newlifegames.net/nlg/index.php?topic=12381.msg107263#msg107263
Title: Re: S2000 Sound Problem Post by: Buzz on April 25, 2013, 11:27:00 PM Thanks Jason. It seemed strange that they would put two speakers and only power one. I think I will tap into the other so at least it is doing something. Easy enough to do , take a sewing needle and shove it through the center of the two white wires and cut off both ends of the needle ( be carefull the needle is hardened steel and when cut pats will go flying ) Tape the needle so it can't short out. No butchered wires this way and when your tired of playing around with the sounds, just pull the needle out. |