New Life Games Tech Forums

Greetings.  It's been awhile since I've posted to this AMAZING forum.  Glad to be back again!

I have a Bally E-Series, 5-reel that's gone on the fritz.  When I power it up, the machine goes into TILT mode and gives me a "5" in the payout display in the first (left-most) digit position.  It may be trying to give me an error code of "50" as the 2nd digit position will have a "0" that sometimes flickers.  Hard to tell.  The hopper will also turn just enough to pay out one coin.  Pressing the reset button doesn't do anything.  Quite sad as this is a super fun machine.  I'd love to bring it back to life.

The machine is a 5-reel, 3-coin, 3-payline machine.  One of the very first e-series as far as I know.  Here's hoping someone can give me some advice....  I can up load pics if desired.

Dean

Posting pictures will help to make sure we
give the right info for your machine.
Post good pictures of the inside and
if you can a pictures of the MPU board.

Do you have the manual for this machine?
What is the model #of the machine?

Paul