New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: overload on May 18, 2013, 01:01:16 PM



Title: is dbv-200 a direct snap in replacement for a dbv-145?
Post by: overload on May 18, 2013, 01:01:16 PM
is dbv-200 a direct snap in replacement for a dbv-145? or do i need the whole can.


Title: Re: is dbv-200 a direct snap in replacement for a dbv-145?
Post by: Buzz on May 18, 2013, 02:56:40 PM
If this is for your Bally 5500, yes just swap the bill head. If you now have a IGT S+ you will also need to change the BV power supply.

Bally 5500, bypass two micro switches, one above and one below the cash can. You can now eliminate the cash can and the bills will fall into the cavity where the cash can use to be installed. Makes it a lot easier to retrieve your money.

If your machine has a cash can door latch, no need to bypass upper micro switch. Just use a piece of tape and tape down the lower micro switch located in the bottom of the cash can cavity


Title: Re: is dbv-200 a direct snap in replacement for a dbv-145?
Post by: overload on May 18, 2013, 03:19:42 PM
anyone know where i can buy dbv- 200 head?


Title: Re: is dbv-200 a direct snap in replacement for a dbv-145?
Post by: Buzz on May 18, 2013, 03:48:02 PM
anyone know where i can buy dbv- 200 head?

Unless you want a DBV 200 that won't work in your machine, your going to have to tell folks what brand machine you have. True the bill head from a Bally will fit in a IGT but they have a different program installed in them.


Title: Re: is dbv-200 a direct snap in replacement for a dbv-145?
Post by: overload on May 18, 2013, 04:00:17 PM
1995 bally s5500, anyone know where i can buy a dbv-200 head for this machine?