New Life Games Tech Forums

**Video Slots** Gaming machines => Atronic => Topic started by: resanberto on May 22, 2013, 11:11:52 AM



Title: Atronic Cash Fever problem solved
Post by: resanberto on May 22, 2013, 11:11:52 AM
Hi Slot Tech's,

I like to share this with you.

Atronic Cash Fever machine slow performance (freeze) problem after startup  :294-.
No errors in my log nor displayed.
Measure voltage on connector board shows that +5v drops to +4.6v and +12v drops to +11.6v.
Change 3 10v/2200uf and 1 10v/4700uf.
Machine runs perfect.

note: when machine boots but doesnt display anything on top and down display , take off VGA card and clean contacts with cleaner.

Best regards,

Alberto



Title: Re: Atronic Cash Fever problem solved
Post by: Dani on December 09, 2013, 05:48:59 PM
Thanks. I had same problem and i moved the ATX power plug directly on the multimedia board. I did that to reduce the plugs trough the current passes. Also i use to supply the video card the same directly from the power supply. No by the book, but Atronic didn't read the book also when designed those machines.