New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: staz on May 22, 2013, 08:07:17 PM



Title: My MEI on my s2000 is acting up?
Post by: staz on May 22, 2013, 08:07:17 PM
this happened to me twice so far the bill validater just stopped working on my top dollar and all 3 lights on it lite up green yellow and red solid on the head unit and it wouldnt do nothing..... so both times i had to shut the machine off and restart it.....is there a reset button to get rid of those solid colors on the mei if it happens again? what would cuase that? also can i pull out the mei head unit out when the machine is on?


Title: Re: My MEI on my s2000 is acting up?
Post by: Yoeddy1 on May 22, 2013, 08:10:39 PM
Give this a shot:

1 Tests, I/O, Auto-Configure Netplex devices (4.3), Press the Spin reels switch.
This has the machine find all netplex devices and hopefully store the new CRC for the BV.
2 Options, Machine Options, Limits, Bill Limit (3.1.4) set it to a value you like using the change and cash/credit switches.
3. Make sure the BV, transport, and cash can are properly installed and seated.

Jason


Title: Re: My MEI on my s2000 is acting up?
Post by: staz on May 22, 2013, 08:27:12 PM
checked all 3 things looks good...... could it just be the mei head unit not seated good? only thing i changed on the bill validater options was soft tilt versus ignored tilt......what does that mean anyway? and can i pull the head out and reseat it while the machine is on?