|
Title: Bally Alpha not booting up Post by: keystone9 on May 27, 2013, 12:04:51 PM Have a Bally Alpha Video, M9-2, "Winning Times" that is not booting up after the splash screen. Any ideas where to go from here? Thanks. Bill
Title: Re: Bally Alpha not booting up Post by: Neonkiss on May 27, 2013, 02:08:13 PM Bill have you checked the power supplies?
Then I would try a clear with the proper clear card. If that doesn't resolve the issue, look into a CPU replacement. Title: Re: Bally Alpha not booting up Post by: keystone9 on May 27, 2013, 02:35:58 PM I will look into that. How do I know what is the proper clean card and where do I get one? Thanks
Title: Re: Bally Alpha not booting up Post by: lindam1 on May 27, 2013, 03:10:52 PM Bill,
You know they take about 18 min. To fully boot. Lindsay Title: Re: Bally Alpha not booting up Post by: keystone9 on May 27, 2013, 03:19:43 PM Hi Lindsay. Yes I heard that before. That's an awful long time but I'll try it again. Anything to shorten that time? Bill. Also It's just a blank screen after the splash screen while I'm waiting.
Title: Re: Bally Alpha not booting up Post by: Neonkiss on May 27, 2013, 03:45:40 PM To know what clear card is needed, you would have to post what operating system your using.
Title: Re: Bally Alpha not booting up Post by: keystone9 on May 27, 2013, 04:38:38 PM Can you tell me where I can find out which OS I am using? Is it on the flash cards? Thanks. I found an AVOS# 317-02 on the top flash card.
Title: Re: Bally Alpha not booting up Post by: CVslots on May 27, 2013, 04:53:54 PM That's it! Your running OS 317.
Title: Re: Bally Alpha not booting up Post by: keystone9 on May 27, 2013, 05:23:21 PM I checked the 2 batteries on the board and they are dead. Will this stop the game from booting?
Title: Re: Bally Alpha not booting up Post by: Neonkiss on May 27, 2013, 06:57:28 PM I checked the 2 batteries on the board and they are dead. Will this stop the game from booting? I do believe so, but do not know for sure.I did have a machine throw an error code and lock up when only one battery was low. I had to perform a complete clear to bring the machine back up after replacing the batteries. Title: Re: Bally Alpha not booting up Post by: lindam1 on May 27, 2013, 07:40:20 PM Bill,
If the batteries are dead you will need a clear CF b4 you can boot Lindsay |