|
Title: WMS BB1 BV issue Post by: bhinkley on May 28, 2013, 09:37:00 PM I am trying to track down a BV issue on some BB1 machines. I have some machines that originally had MEI validator in them, but none of the validator were working. I have been trying to swap them to WBA13 validator. I had the WBA running on one of the machines, but when I did a ram clear to switch games in it now I am only getting a bill validate com error when trying to set up the machine and it does not cycle. I have swapped out parts from known good machines and the same result happens. What could be causing this in these machines?
Title: Re: WMS BB1 BV issue Post by: Bettor Slots on May 29, 2013, 05:36:58 AM Study the jumpers.
Title: Re: WMS BB1 BV issue Post by: Nashional on May 29, 2013, 01:07:11 PM I know it's obvious, but make sure you are choosing JCM and not MARS when setting up the devices in the programming.
Title: Re: WMS BB1 BV issue Post by: bhinkley on May 29, 2013, 03:04:01 PM Thanks. I am betting it will be the jumpers. The setting is jcm already.
Title: Re: WMS BB1 BV issue Post by: bhinkley on May 29, 2013, 10:02:55 PM The jumpers fixed the issue. Thank you for the suggestions.
|