|
Title: where do i plug in this progressive on a s2k Post by: staz on June 05, 2013, 07:17:48 AM im helping a buddy install this meter over the phone but not sure where this meter plugs in?? pic 1 is the meter with 2 plugs..... pic 2 is the netplex board...... does it have to be a specific place where those 2 plugs connect on the netplex board?
Title: Re: where do i plug in this progressive on a s2k Post by: staz on June 05, 2013, 07:21:48 AM heres a pic of his board also...... which plugs does he use?
Title: Re: where do i plug in this progressive on a s2k Post by: therockinelvis on June 05, 2013, 07:34:30 AM Does the s2000 not need a progressive controller? Looks pretty easy if the s2000 programs it too.
Title: Re: where do i plug in this progressive on a s2k Post by: staz on June 05, 2013, 10:45:17 AM I don't think it needs a controller......
Title: Re: where do i plug in this progressive on a s2k Post by: qbert on June 05, 2013, 12:49:58 PM Looks like a spectrum progressive.
They are easy, any netplex input plug should work. Key the machine set it up in progressive as a stand alone. Check the spectrum board on this site foster has posted excellent set up instructions. Rich Title: Re: where do i plug in this progressive on a s2k Post by: cowboygames on June 05, 2013, 01:09:43 PM Staz, that ten pin molex should plug in over in the left rear corner of the top box where your audio and other stuff is plugged in
Title: Re: where do i plug in this progressive on a s2k Post by: Foster on June 05, 2013, 06:36:59 PM It gets plugged into the power distribution board
the 10 pin with 5 wires is the netplex connections the 4 pin with 2 wires is the power. Title: Re: where do i plug in this progressive on a s2k Post by: staz on June 05, 2013, 07:30:41 PM thanks guys i will relay the instructions........ hes just changing kits from non spectrum glass kit to a spectrum glass kit..... i sent him a 45 key chip so he should be good to go.....
|