New Life Games Tech Forums

Hey gang,

I wanted to know if it was at all possible to convert a WMS BB1 machine into a much smaller custom made cabinet? I thought I had came across a site where they did custom cabinets, but that was several years ago. My main reason for doing this is to it's not such an eye sore and take up so much space in my den. Any thoughts or suggestions are appreciated.

Thank you :)

im sure its possible but you will most likely run into unforeseen problems. moving the parts closer together may cause heat or interference problems. i have never worked on a wms machine but i often think that theirs a lot of wasted space in most the machines i have worked on, especially if its coin less. i built a custom lcd for a gamemaker i was tempted to hide a computer and kvm in the space the old tube took up.

Yes it's possible.  I've seen more wms games in slimline sitdown cabinets than I have in the original cabinets (live in a no "legal" slot state). 

I've even seen an Igt slant top  converted to a slimline cabinet.

You might try bigdaddygames,  or somebody that makes POG cabinets, but I'm not shure if they sell empty cabinets.