|
Title: CHAM2 Controller Post by: tjlee on June 18, 2013, 03:45:23 PM Can anybody tell me how this is connected and used in a linked system. Can it be used SA with a single slot somehow? I have work a little with the CHAMII+ controllers but never with this system board. I assume it is a linked system board. I have just started working with progressives so my knowledge is limited. Is there a manual available here that would help me understand. Any help would be appreciated Thanks in advance.
Title: Re: CHAM2 Controller Post by: idesign on June 18, 2013, 04:33:08 PM The CHAMII requires a CON2 to function properly. What you have can not be used stand alone without it.
Title: Re: CHAM2 Controller Post by: tjlee on June 18, 2013, 06:10:44 PM Thanks for reply.. That's answers a lot of questions I have about this. Supercontrollers are out of my price range for now so I guess I would be better off just buying another CHAMII+. Thanks again for the info. :131-
Title: Re: CHAM2 Controller Post by: idesign on June 18, 2013, 06:50:50 PM Below are a couple of older photos of my machines using a CHAMMII in the machines hooked up to a CON2 also connected to 2 overhead displays running supreme boards also hooked up to the CON2.
The CON2 has come down in price since then so it's not that expensive to set one of these up. Title: Re: CHAM2 Controller Post by: tjlee on June 18, 2013, 11:19:17 PM Very nice setup. I really appreciate the photos and the input. I will keep my eye open for a CON2, Maybe someday Thanks Ted
|