|
Title: Bally S5500 Problems Post by: tjlee on June 23, 2013, 08:39:57 PM Hello to all--Bought a Bally S5500 with U18, U20 mains. Battery was dead in it so I replaced it and did a reset and now all I am getting is 2.0. flashing in the winners led and no bill validator working. My board resets using a jumper on the MPU and it is resetting OK. What I am doing wrong?? THis is my first S5500 so bear with me Thanks in advance. Ted :103-
Title: Re: Bally S5500 Problems Post by: Oscar Pompa on June 23, 2013, 09:52:28 PM 2.0. or a 2x code in WIN PAID means a coin jam check the following:
1. If jammed, open the door and remove the acceptor module. Once removed, coins can be gently extracted with a small screwdriver or similar tool. 2. Confirm the Coin Optic Decoder board optic sensors and prism are clean. Dirt can block the light path and prevent proper operation. :) +1 Title: Re: Bally S5500 Problems Post by: tjlee on June 23, 2013, 10:10:12 PM Just got into looking at this and coin comparator light is not on and I am wondering if this is working at all. Is there a way to bypass this to see what happens. Thanks for the info. Ted
Title: Re: Bally S5500 Problems Post by: tjlee on June 23, 2013, 10:36:52 PM OK I cleaned the optic sensors and the optic sensor is working but now I am getting a 3.1. flashing code on the win meter. Help!!! :279-
Title: Re: Bally S5500 Problems Post by: tjlee on June 23, 2013, 11:05:01 PM Got the 3.1 error fixed(hopper wasn't plugged in all the way)..Slot played good for about 3 times and now its going to a plain 20 flashing in the winners window. Where can I find a list of error codes for this machine
Title: Re: Bally S5500 Problems Post by: tkrozleski on June 23, 2013, 11:09:50 PM Inside of the door panel has a decal with the error codes with description
Title: Re: Bally S5500 Problems Post by: CVslots on June 23, 2013, 11:15:53 PM Error code 20 is a Coin-In Jam, so check your coin path and see what's going on....But are you sure that's an error code and not just a statement? Could it, by chance, be the Win on the last game played? Is there a winning combo on the reels?
Title: Re: Bally S5500 Problems Post by: tjlee on June 23, 2013, 11:31:47 PM It's an error code as coins just dropped through into tray and do not register on counter. Could be the coin comparitor is at fault. Is there a way I can bypass the security on this and just let the coin be counted?? Thanks guys for the comments and suggestions. I am new at this and learning.
Title: Re: Bally S5500 Problems Post by: MarkInAz on June 24, 2013, 10:23:21 PM I'd suggest running the Input Test. All input signals to the machine can be checked including the coin comparator. Follow the procedure in the manual and confirm you get the correct responce when a coin goes through.
Cheers, Mark Title: Re: Bally S5500 Problems Post by: tjlee on June 25, 2013, 01:11:09 AM Will do--THanks for suggestion
Title: Re: Bally S5500 Problems Post by: mah on June 25, 2013, 10:07:15 AM Just had a similar problem, turned out one of the three wires going into the left side of the comparitor was broken off at the harness.
Might want to check the wires. |