|
Title: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Sovereign on June 28, 2013, 02:21:14 PM Hello Everyone,
After replaced the battery I cannot prceed to hopper limit and pay table test option. Have you ever encountered this problem please let me know how to resolve this issue. Thank you and Best regards. Fernando Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Crowsen on June 29, 2013, 01:35:24 PM If you remove the battery on the processor you will be lucky if any settings are saved. Make sure hopper is enabled and soft settings are correct.
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Sovereign on June 29, 2013, 06:55:10 PM Crowsen,
Any solution for this? If there is please let me know how since I don't have any manual for this SP873. And if you have manual for this I highly appreciate if you can give. I had a lot of SP's manual but except on this type maybe you need it too. Thank you Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Buzz on June 29, 2013, 07:28:39 PM See if this helps.
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Sovereign on June 29, 2013, 10:54:56 PM Thank you so much Buzz , I will try later when we open the casino and I will let you know.
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: knagl on June 30, 2013, 07:22:26 PM If you're getting weird behavior after a battery change, you may wish to use a RAM clear chip. It isn't typical that you'd need to, but in this case it may help restore the machine back to normal.
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Sovereign on July 02, 2013, 04:29:59 PM Thanks for the advice. I will try the keychip
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: knagl on July 03, 2013, 03:21:03 AM There are no "keychips" for a S+ machine -- there's a RAM clear chip, and a SET chip used to set the denomination and enable the bill validator. I'd suggest the RAM clear chip to clear everything back to the default settings, then go through and re-configure all of the settings (and use a SET chip if you have a bill validator to re-enable).
Title: Re: IGT S+ SP873 Haywire Deluze Self Test Freez by 10-2 Post by: Sovereign on July 03, 2013, 04:32:12 PM Thank you very much .
|