|
Title: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: botija on March 25, 2009, 03:44:03 AM i need to know how i can use a bill validator jcm model wba on a IGT s-plus, actually are using a Ardac iba4, it can be possible??
thanx. Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: Jim on March 25, 2009, 12:42:48 PM Yes it should be possible!!! go to general chat reel machines reply # 19 you will see a picture of the same type machine with a wba installed. To do that particular install you need a wba housing,that attaches to the main cabinet with 6 bolts, consists of housing and door on hinge. Then a wba insert, which will hold the transport unit and cash can. It goes inside the housing attaches with 2 screws in the back and 1 on the side. Then you need the transport and head unit, cash can, and power supply. hopefully the wiring harness will be the same . You will have to make sure the wba insert has the right wba harness connector attached to the top left rear. and finally the proper housing on the front door. I don't know if the Ardac will have the same opening as the wba series.
This is just a place to start, hopes this helps Jim Sorry topic is igt barcrest top dollar code 64 Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: SIMAR on March 25, 2009, 07:21:19 PM claro que si, solo debes comprar la fuente original, de lo contrario eventualmente robara billetes.( off course, only buy original interface jcm, otherwise eventually no send pulses)
Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: botija on March 25, 2009, 10:50:18 PM a que te refieres con la fuente oiginal? en el topic que me comenta Jim se el billetero con la fuente que actualmnte estoy usando con el ardac, lo que mas me preocupa es como es el tema de protocolos y sonexiones de cableado. tienes el pinout de los conetores?
Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: SIMAR on March 26, 2009, 09:18:34 PM Nosotros aca en Colombia para poder conectar este aceptador a una IGT compramos la fuente o la interface original de JCM, pues sin esta interface la maquina nunca te reconocera este billetero, mira en los manuales de WMS para los pinout y mira estos enlaces http://www.myslotnotes.com/IGT%20Software%20ID.htm , http://www.jcm-american.com/docs/manuals/960-000076/INDEX/HTML/INDE.HTM
Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: moha072 on July 26, 2010, 08:12:29 PM hola prodrias enviarme una foto de la interface ya que estoy interesado en conectarlo tambien.
saludos Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: StatFreak on July 26, 2010, 11:06:59 PM hola prodrias enviarme una foto de la interface ya que estoy interesado en conectarlo tambien. saludos Quote hello cooperation could send a picture of the interface and I'm also interested in connecting . regards Welcome to Newlifegames :88- I wanted to let you know that this thread is 16 months old, so you might not get a response, but you never can tell. StatFreak :31- :nlg- Global Moderator Bienvenido a Newlifegames :88- Quería hacerle saber que este hilo es de 16 meses de edad, por lo que no podría obtener una respuesta, pero nunca se puede decir. StatFreak :31- :nlg- Global Moderator Title: Re: how can i use a JCM WBA on a IGT S-Plus Top Dollar game? Post by: moha072 on July 26, 2010, 11:09:22 PM ok es que estoy buscando esta info que es muy importante muchas gracias
|