|
Title: mk6 crt monitor no picture Post by: bob smith on July 02, 2013, 04:31:53 AM Hi Everyone,
I have a problem with my CRT monitor on my Mk6 machine.It was exposed to moisture in the back of my Ute,i couldn't see any water in the globes at the back of the monitor and have put it out in the sun for a few hours to dry. when I went to turn it on the screen boots up and I see a image for a couple of seconds then a white vertical line than everything disappears,i still have audio and everything else seems to work except picture. Can someone please help as my next move will be to take it to someone but if its a quick fix id rather try to figure it out myself please let me know. Thanks Title: Re: mk6 crt monitor no picture Post by: Gaming1 on July 03, 2013, 05:32:54 AM What type of monitor board is it. Ceronix or Kristal or other and is it in nsw
Title: Re: mk6 crt monitor no picture Post by: SS308 on July 04, 2013, 02:23:50 AM Hi Bob/Paz,
thought you were getting an LCD for it? Title: Re: mk6 crt monitor no picture Post by: nano on July 18, 2013, 10:24:39 AM Check horizontal deflection yoke connector.Maybe it has bad conection.
Check block capacitors around flyback transformer. Title: Re: mk6 crt monitor no picture Post by: Mazwreck on October 18, 2013, 09:19:52 AM Bad soldering on neck pcb is the issue
Resolder the crt socket and the colour wafers and should be sweet |