|
Title: Game King Closure MB questions Post by: motom67 on July 02, 2013, 03:16:45 PM Im working on a Game King and can not get it to accept bills. I know it is something easy but I haven't pin pointed the problem. This machine has no coin acceptor. Only bills. The machine worked fine at one point but recently did not want to accept bills (no lights on the bezel). I switched out the BV and Transport for a good working unit. No luck. I found a hanging switch in the Cash Can compartment. When I press this button it shows a Closure B error. I've tried diagnostics with no luck. I've tried taping the button down with no luck. Now I have a Closure MB on the right bottom side of the screen when all doors are closed. I've ready a lot of posts and have not found my answer. Thanks for the help.
Title: Re: Game King Closure MB questions Post by: CVslots on July 02, 2013, 03:54:22 PM A Closure message is not an error, but more of a History. Anytime it says Closure XX, it's telling you the door was opened, but is now closed. If it thought a Door was open, it would say Door Open XX (like Door Open MB, Door Open B, etc.)
Is the Cash Can in all the way??? Title: Re: Game King Closure MB questions Post by: motom67 on July 02, 2013, 04:00:45 PM The cash can appears to be in all the way. The latch appears to lock down like a normal working one. When the machine is one the Cash Can sensors acknowledge that the can is in.
Title: Re: Game King Closure MB questions Post by: CVslots on July 02, 2013, 04:36:33 PM Ok, I was kinda fishin there, hoping it was an easy fix! :72-
You have witnessed this machine take and register bills, correct? And is there anything that happened meanwhile we need to know about? What shows at the bottom of the screen now? Anything besides Closure messages? Title: Re: Game King Closure MB questions Post by: motom67 on July 02, 2013, 04:44:25 PM I have sen it take bill sand it registered perfectly at one time. Someone took the cash out of the can and now it doesn't take the bills. I added a pic to this post. No other problems.
Title: Re: Game King Closure MB questions Post by: CVslots on July 02, 2013, 05:11:36 PM Since it is not thinking a door is open, the only thing that comes to mind is the cash can itself. Do you have another one you can try? If it is not fully engaging, it will do exactly as you are experiencing. The fact the cash can was emptied and put back in rightnbefore the symptoms started seems to be more than a coincidence, especially since no other erros are present.
Also, slide the BV out and back in (firmly), just to make sure it's seated properly and making a good connection. Title: Re: Game King Closure MB questions Post by: zarobhr on July 02, 2013, 05:28:25 PM The cash can appears to be in all the way. The latch appears to lock down like a normal working one. When the machine is one the Cash Can sensors acknowledge that the can is in. the latch should lock in the up position not the down position, you press down on lever when removing when you reinsert the cash can make sure lever is moving up. also if you power cycle you you hear the BV making its cycle noise Title: Re: Game King Closure MB questions Post by: 2Nutz on July 03, 2013, 12:50:56 AM Is there a lock w/ cam in the Bill Validator door? Is the cam hitting the micro switch on the right hand side of the unit? The micro is hidden behind a steel plate. If possible, go into the diagnostic menu and verify the validator Door switch changes open to close when turning lock/cam.
Just had this Exact same issue with a GK just purchased. Second picture in 1st post and associated comments in 4th post here ==> http://newlifegames.net/nlg/index.php?topic=24655.0 |