|
Title: How I silenced the diverter coin plate and fed all coins into the hopper Post by: Jeff99 on July 07, 2013, 09:47:23 PM The hum of the coin diverter coil can be annoying, especially in a quite house. I was just restoring a machine where the last guy had cut the coil wire among other “fixes”. My preference is to restore a machine back what it was on a casino floor with all wiring intact. It just dawned on me that all I had to do was set the micros-switch on the hopper that operates the diverter coil to the open position. To do this I simply adjusted the collars on the coin level detector to set the ball out of the way of the coins in the hopper and the micro-switch to the open position. I used a little paper wedge to push the diverter plate back do the coins will always go into the hopper.
Hope this helps, Jeff Title: Re: How I silenced the diverter coin plate and fed all coins into the hopper Post by: Amachanic on July 07, 2013, 10:28:52 PM Jeff that a good idea to keep that diverter quiet. No cutting, and easy to reverse if you wanted too..
Karma :259- to you for this idea.. Gary |