|
Title: SEGAI SE-MC33XX Post by: ANDRIU on March 25, 2009, 09:08:06 PM I wanna know if somebody have this service manual segai SE-MC33XX, or a guide to solutions for this monitor ??
I need it.. so thank you so much :59- Title: Re: SEGAI SE-MC33XX Post by: badbaud on June 15, 2011, 11:02:02 PM I just fixed one but can't find a schematic either. Had a note from some tech "if to wide" change C327 and C334 (inside FBT cage).
Title: Re: SEGAI SE-MC33XX Post by: proten on June 15, 2011, 11:19:07 PM Here is a manual for a SE-MC23XXX That I found.
Title: Re: SEGAI SE-MC33XX Post by: proten on June 15, 2011, 11:20:55 PM There is the last part.
Hope this helps. Title: Re: SEGAI SE-MC33XX Post by: badbaud on June 16, 2011, 12:18:18 AM That's the one. Thank you very much.
If you know anyone who needs any CDS touch screen monitors in various states of disrepair please let me know We have 15 of the 19" monitors and have no use for them. Got them in a lot sale. Title: Re: SEGAI SE-MC33XX Post by: proten on June 16, 2011, 12:47:40 AM Sorry I don't.
But your note on the C327 & C334 cap helps me with a problem I have with my 13" SEGAI in my Bally. Do you have any other notes on this monitor? Paul Title: Re: SEGAI SE-MC33XX Post by: badbaud on June 16, 2011, 01:34:38 AM No, in the monitor repair disk we got from someone, under that brand, there was one tiny Notepad note with those two comments.
Jim Loveless is the one who wrote the note, call him and maybe he can help. Your width is still to wide? I had also replaced a 47uF and a 220uF 200v in that same section as the 47uF mentioned in the note. Maybe that fixed my problem. Hope it's not that big diode mounted to the heatsink in that same area. Replacing the 10uF inside the FBT metal cage usually solves a width problem. In earlier versions of the board it is always the 4.7uF 250V non-polarized cap outside the FBT area. |