|
Title: Game and Reel Ziff Sockets for Eproms Post by: slotace on September 20, 2008, 05:29:54 PM If you make games changes on your machines, these are the best things since sliced bread! No more bent or broken pins, a turn of the small crank and you just lift out the eprom; the reverse when dropping in the new eprom. These sockets can be soldered in or they hold good by just pressiing them into the existing socket. The best thing I ever bought! Here is a pic!
Title: Re: Game and Reel Ziff Sockets for Eproms Post by: ricker on September 20, 2008, 08:04:26 PM Very nice slotace. Where did you get them? I'd like a few.
Richard Title: Re: Game and Reel Ziff Sockets for Eproms Post by: slotace on September 20, 2008, 08:55:54 PM Here you go!
Jameco.com SOCKET,ZIF,28PIN,LOW-PRO, USE WITH STD 28PIN SOCKET Jameco P/N 102745 Mfg ARIES ELECTRONICS Mfg # 28-526-10-R RoHS? Yes Shipping Availability Today They also have all sizes. $6.05 up to 10 +10 $5.50 Title: Re: Game and Reel Ziff Sockets for Eproms Post by: dpalmi on December 18, 2008, 03:02:47 PM Hello all!
I am going to be buying some ZIF sockets for my two S2000 machines and just wondering if anyone else has done this and what/where they bought them and if they have any suggestions or comments. I will be buying a 40 pin for Key/Clear/Base and a 28/32 pin for game. I have found various ones from both Jameco and Digikey - just not sure which ones to pick and looking for input from someone who was done it... Thanks! Dan #2 Title: Re: Game and Reel Ziff Sockets for Eproms Post by: Foster on December 18, 2008, 05:19:02 PM I think I acquired the 28 pin ones from Jameco, at the time I only had the S+.
Since I am using S+ reel chips in the Vision/S2000 I use the 28 pin ZIF for U17. Title: Re: Game and Reel Ziff Sockets for Eproms Post by: Ron (r273) on December 18, 2008, 05:53:06 PM Hello all! I am going to be buying some ZIF sockets for my two S2000 machines and just wondering if anyone else has done this and what/where they bought them and if they have any suggestions or comments. I will be buying a 40 pin for Key/Clear/Base and a 28/32 pin for game. I have found various ones from both Jameco and Digikey - just not sure which ones to pick and looking for input from someone who was done it... Thanks! Dan #2 Just make sure they are the low profile kind. Some others are thicker and can cause space problems. Title: Re: Game and Reel Ziff Sockets for Eproms Post by: dpalmi on December 18, 2008, 05:56:14 PM Just make sure they are the low profile kind. Some others are thicker and can cause space problems. Hello! This is going into a S2000 so I don't think space will be an issue - but I will check the dimensions. Thanks! Dan #2 Title: Re: Game and Reel Ziff Sockets for Eproms Post by: Ron (r273) on December 18, 2008, 06:02:15 PM Just make sure they are the low profile kind. Some others are thicker and can cause space problems. Hello! This is going into a S2000 so I don't think space will be an issue - but I will check the dimensions. Thanks! Dan #2 I use one low profile socket in each of Visions and S-2000s to hold an SS chip. Ron |