|
Title: Bally 6000 door 50 error Post by: gposing on July 19, 2013, 12:55:56 AM this slot was given to me and I have no idea when the last time it worked. I purchased new mains for it and clear chips. Put them in and the pseudo coin in works, but when I close the door the 50 error appears. Here is what I have found so far. I traced the black and orange wire the goes from the cabinet optic to behind the reels, but it is not plugged into anything. What I have found it should be in the J3 connector. There is also a cherry switch on the door (picture attached). When I place the slot into the input test, nothing happens when I press the button. I tested the main door button with a meter and it was fine. So I traced the blue and orange wire and it goes into a small silver box behind the WBA. (picture attached). A blue and orange wire comes out of the box, but when I test it, there is no signal. Also this blue and orange wire does go to the J3 connector.
Very confused??? :279- Title: Re: Bally 6000 door 50 error Post by: gposing on July 30, 2013, 02:36:58 PM I got the problem solved. I was able to trace the door wires and found two of them that were unhooked in the door.
|