New Life Games Tech Forums

IM LOOKING FOR IGT TOP DOLLAR MACHINE PARTS, SUCH AS POWER SUPPLY ETC.

You may want to expand a bit on the parts you are looking for....Barcests are part S2000 and part Bonus game. Many of the lower cabinet parts are standard S2000 parts, so don't narrow yourself down to "Barcrest" parts only, or you will be paying 2-3x as much for the same part.  :60-

Is there a certain part you are needing? Top Dollar is the game theme, S2000 Barcest is the platform.  :89-

Barcrest also comes in an S+.  Maybe a pic of your machine?

I'm sorry. I did t even look to see what board he posted on!  :25-

it is a flat top model, i was told it may be the power supply unit in the top part of the machine

You have an S+ Barcrest. I have  spare Barcrest Parts including power supplies. Maybe you should let us know exactly what is happening or isn't happening, codes and perhaps what it does on start up. Looks like you need a battery for starters.......

Dale

thanks so much,  C03   BOTTOM LIGHTS UP  TOP DOES NOT, I DO NOT SEE THE LITTLE RED POWER LIGHT LIGHT UP ON THE BOARD,  ONLY THE POWER SUPPLY LIGHTS UP

What Dale was referring to was the "12" in the display (under the reels). A "12" indicates a low battery on the MPU. You will need to fix this BEFORE we can address the TopBox issue.

You will need to get a 3.6v Lithium battery. If you have a Batteries Plus store near you, they can replace the battery for you. You can also do it yourself if you can solder.

Let us know if you have questions.

The CO3 is normal for the TOP BOX on start up. I would put the new battery in the MPU and you might be OK. If not I'm sure we can figure it out from there.

thank you so much  is that battery something i can buy from you?  and yet it does show 12 there. 
and where is that battery located

is this the battery   not a coin type but barrel type   
    Xeno 3.6V Lithium D Cell - XL-200F

    Reliable and long-lasting design. This Xeno 3.6V, thionyl chloride lithium D-cell will provide enduring power. Excellent memory backup power source and low self discharge rate.
    Item number: XL-200F
    Weight: 0.1995 lbs
    Voltage: 3.6V
    Capacity: 16500MAH
    Watt Hours: 59WH
    Number of Cells: 1
    Primary Applications: Primary and back up power applications
    Replaces: 30312, DANLITH15, ER34615, LIT1963, LITH15, LS33600, SBD01, SL780, TL2300S

Just as long as the 3.6v lithium 1/2AA battery has leads coming off of it so it can be soldered in. I  like the wire leads cause they are a little easier to solder. Batteries Plus has them and could probably replace them for you.

The battery you listed doesn't have leads.

This battery is located in the MPU board behind the hopper. You need to slide the hopper out and you will see a metal box with a black knob on it. You have to lift straight up, it could be a little sticky but it will come up. Look inside and you will see the battery.

Dale

thank you, really appreciate it.

Jrmsr123 - I sent you a PM on the battery.

Roslyn

 :212-

Agreed 100%.  The top box won't be ready until the base machine is, and the base machine won't be ready until it has a new battery.  Chances are pretty good that replacing the battery in the machine's MPU board will fix everything.

Hi again,  I had the battery replaced, i get a 61 in the left side of the machine,  still no top lights and both flashing lights.   do you have anymore suggestions?  I would appreciate your input.

61 is a common error on S+, look at the faq detailed below on what to do to clear it.
http://www.newlifegames.net/igterrors/ (http://www.newlifegames.net/igterrors/)

Completely normal to get a 61 after battery change. Follow the steps I sent in the PM and you'll be set. But, you MIST follow the steps exactly.