|
Title: Bally EVO Hybrid Problems Post by: tjlee on July 21, 2013, 01:44:15 AM The Bally EVO Hybrid I had working so well for about two weeks up and died on me. First I noticed the CD was not booting and then the video went out on me. Machine starts to boot but cannot access the CD to load the OP system. Here is what I had done so far trying to solve the problem. I changed ATX supplies, used different video cards, put a different CD drive in it and hook an external monitor to it--same thing--nothing--. Pentium computer board has sound and when you eject the CD and reload it the green CD light is on for a few seconds until it finds the CD but again it never loads. Anybody got any ideas on what to do next. Finding parts for this is like looking for a needle in a haystack. I have no extra MPU or computer system board to exchange in it for testing. May end up being a parts machine. That would be a shame if I have to do that.
Title: Re: Bally EVO Hybrid Problems Post by: cp on July 21, 2013, 12:54:26 PM Believe me, there are plenty of Bally Evo-Hybrid parts machines around. I'll check to see if I have any extra "suticases" around. If your monitor is not coming up, perhaps you just have a dead monitor ! (do you get the "no signal" in the screen ? The other thing to check would be battery voltage. 3.6v.
Title: Re: Bally EVO Hybrid Problems Post by: tjlee on July 21, 2013, 02:16:17 PM Battery voltage is good and monitor is good also. I changed the memory in it and also the CD but still nothing. I checked all voltages and the power supplies. Correct voltages are all there. I think the pentium board is the problem but I don't have a processor to swap out in it to see if that is the problem. If you have more suggestions let me know. I appreciate the help and thanks for the reply.
Title: Re: Bally EVO Hybrid Problems Post by: cp on July 21, 2013, 06:48:39 PM If you want a "suitcase" (with the CD player/board etc) AND a game/eprom board... Just pay for shipping and make a donation to the NLG site. ...and I'll send one of each to you. (I can't guarantee anything about the boards.) they may / may not work.
Title: Re: Bally EVO Hybrid Problems Post by: tjlee on July 21, 2013, 07:46:21 PM Great--That's being extremely generous on your part. Donation will be made today. I will PM my mailing address to you. Just email back the cost. I can do PayPal on this and pay the PayPal fees.. Thanks again Ted
Title: Re: Bally EVO Hybrid Problems Post by: tjlee on July 27, 2013, 04:21:30 PM Received a different suitcase thanks to CP and installed it. If I use the slot game FUNKY TIMES it boots past high ram test and then tells me I have a CD FAILURE. If I use the slot game WILD TIMES in it slot boots up and works fine. Both game CD'S are good and so are the chips for them ( both have been tested in a different machine). I tried changing the memory on the Pentium board and also changed the CD player itself. No luck getting this to work with FUNKY TIMES game. Very stange--Any ideas?? Thanks
|