New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: ghetto1971 on July 23, 2013, 09:14:14 AM



Title: converting igt from 4 reel to 3 reel
Post by: ghetto1971 on July 23, 2013, 09:14:14 AM
Want to convert b/c not many kit options for a 4 reel machine.  Is it possilble to just install a 3 reel wiring harness and a long reel glass to cover the fourth reel or do I need a 3 reel shelf?  My machine is a S2000 with backlit reels.


Title: Re: converting igt from 4 reel to 3 reel
Post by: cowboygames on July 23, 2013, 10:22:22 AM
Is it a 4 reel machine or 3 reel with 4th reel bonus feature? A 4 reel machine will require a new reel shelf. A 4th reel bonus machine that uses the narrower 2" wide reel I believe can be converted to 3 reel and the window covered without having to change the shelf. You will probably need to change the reel harness and backlight controller in either case


Title: Re: converting igt from 4 reel to 3 reel
Post by: ghetto1971 on July 23, 2013, 10:29:38 AM
It is a 3 reel machine with narrow 4th reel.  Thanks for the info cowboy.


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on September 02, 2013, 04:21:39 PM
Hello,


do you progress on your project?

I have a Super Spin Sizzling 7, 3 reels + 1 bonus and I also wondered if the change was possible?

Regardless of glass and symbols, what will happen if I want to change the machine to have a Triple Wild Cherry?

For exemple, if I put a SG000363 + SB100313 + DSV00042 + VS011GX1

Is this going to work or will it change the reels harness ? Is it not possible to just disconnect the bonus reel ?  :103-


Thank you !


Title: Re: converting igt from 4 reel to 3 reel
Post by: ghetto1971 on September 02, 2013, 04:26:58 PM
Had to get a 3 reel harness and 3  reel deck.  Not hard to switchout and definitely worth it.
Gives you more options when looking for game kits.


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on September 03, 2013, 03:03:12 AM
ok, thank you.

But what do you mean about the reel deck ?  :103-


Title: Re: converting igt from 4 reel to 3 reel
Post by: cowboygames on September 03, 2013, 04:35:36 AM
He's referring to the shelf that holds the reels in place


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on September 03, 2013, 05:34:54 AM
Thank you Cowboygames !


But as you say, if I covered the fourth window, I don't need to change the shelf, do I ?



Title: Re: converting igt from 4 reel to 3 reel
Post by: cowboygames on September 03, 2013, 07:58:43 AM
That's where the printer usually goes on a three reel machine. If you won't be using the area for that you can probably just cover the window. Seems like they make two different shelves, but I can't remember now :103-


Title: Re: converting igt from 4 reel to 3 reel
Post by: rickhunter on September 03, 2013, 08:23:26 AM
There are two different 3 reel shelf. One for the long reel glass and one for the short reel glass.  The location of the reels is slightly different between them.  But I thought the 3 + 1 configuration was just a standard 3 reel harness and the 4th reel was connected as a netplex device, or was the 4th reel part of the reel harness?


Title: Re: converting igt from 4 reel to 3 reel
Post by: Magicslots on September 03, 2013, 02:52:47 PM
Take a look at this post, it might help you.


http://newlifegames.net/nlg/index.php?topic=10180.0 (http://newlifegames.net/nlg/index.php?topic=10180.0)


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on September 03, 2013, 05:15:46 PM
After reading your instructions, I looked at the wiring of my machine. There is a connector for 3 reels + 1 Bonus reel. All these cable are going to the motherboard, and two connectors are going to a card at the bottom right behind the bill validator.

(http://www.subaudio.org/flipjuke/MAS/P1140925_TH.jpg) (http://www.subaudio.org/flipjuke/MAS/P1140925.JPG)



These are the two connectors that are also part of the reel harness.

(http://www.subaudio.org/flipjuke/MAS/P1140930_TH.jpg) (http://www.subaudio.org/flipjuke/MAS/P1140930.JPG)



I suppose it is for a 5 reel slot machine, and there is a molex plug on the reel 4 as Magicslots said in it’s link.
So can I keep my reel harness putting a molex plug on the reel 5 ?

(http://www.subaudio.org/flipjuke/MAS/P1140936_TH.jpg) (http://www.subaudio.org/flipjuke/MAS/P1140936.JPG)




Title: Re: converting igt from 4 reel to 3 reel
Post by: rickhunter on September 03, 2013, 05:24:35 PM
OK, 5 reel incandescent harness plus the terminator plug.  I would just get a 3 reel harness.  They don't cost a whole lot, and you'd probably saving yourself some trouble later on.


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on September 18, 2013, 06:13:38 PM
Thank you, but I still have several questions.   :103-


Here are the games that I have chosen. They are all in 1 line 3 credits except in special cases.
Can you tell me which SG chip manages progressives that are associated with each SB chip. Or which SB chip works with SG000363 or 251

Double Diamond – 2500 – SB100575 – SG ?
Double hearts – 2500 – SB100093 – SG ?
Five Star – 15000 – SB100290 – SG ?
Haywire Deluxe – 2500 – SB100177 – SG ?
I dream of Jeannie – 1600 – SB100037 – SG ?(2 credits)
I dream of Jeannie – 2500 – SB100033 – SG ?(3 credits)
Seven Times Pays – 15000 – SB100097 – SG ?
Triple Diamond – 4000 – SB100058 – SG ?
Triple Dollar – 4000 – SB100058 – SG ?
Triple Double Diamond – 4000 – SB100060 – SG ?
Triple Double Dollar – 4000 – SB100060 – SG ?
Triple Double Wild Cherry – 7500 – SB100313 – SG ?
Triple Lucky 7’s – 4500 – SB100207 – SG ?
Triple Red Hot 7’s – 6000 – SB100500 – SG ?
Triple Star – 6000 – SB100500 – SG ?


Games listed are all in 1 line, but is it possible to take a set of games in 3 lines ? If it is, which ones?

I know that I have many questions... sorry !  :131-  :131-

But  i have not finished yet ; after that I'll have to find the reel strips of the chosen game !
Concerning the glass, since it will  not be possible to be delivered cause too fragile, I think i will integrate a LCD screen in the top box, with a picture of the paytable, like the Bally S9000 for exemple.


Nuirbo


Title: Re: converting igt from 4 reel to 3 reel
Post by: rickhunter on September 18, 2013, 09:46:50 PM
I would use SG00363 for all those.  Why do you want progressive?  As far a the 3 line or 5 line games, they use different reel strips.  I know all the double diamond, triple diamond games are available as multiline games.


Title: Re: converting igt from 4 reel to 3 reel
Post by: Nurbo on December 22, 2013, 05:03:44 AM
Hello,


I finally ordered the game kit Triple Red Hot 7s (2 credits).

To avoid problems, I also ordered a 3 reels harness with backlight.

There has only to wait Santa Claus  :235-


Nurbo