|
Title: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 24, 2013, 07:12:09 AM hello every one
i have a igt s+ hot pepper and i have a problem with the bill validator it stop working the light still on inside the white one but the red are off it did not make noise when i start the machine it's a bill validator money control iba4 what i could do ? Title: Re: IGT S+ hot pepper bill validator problem Post by: shortrackskater on July 24, 2013, 03:59:33 PM I would start by checking the wires/connectors on the sides of the transport assembly. Also check to make the transport is properly seated and that the bill box is in all the way and the door is shut nice and tight.
Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 25, 2013, 04:38:05 AM everything is OK every cable plug everything is in good place
Title: Re: IGT S+ hot pepper bill validator problem Post by: shortrackskater on July 25, 2013, 04:42:00 AM Did you do anything to the machine like change a battery? Or did it just stop taking bills? Does the rest of the machine work properly?
Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 25, 2013, 04:50:22 AM i didn't do anything
it stop one day after a long time not using my slot machine it don't start everything else is OK but the bill validator don't start the machine done me that one time and the bill validator restart alone one day ... so i m a littel bit lost lol Title: Re: IGT S+ hot pepper bill validator problem Post by: shortrackskater on July 25, 2013, 05:03:42 AM To the left of the transport is a power supply. It's mounted on the side. There's two black cables that go to a plastic plug. Make sure that plug is seated properly. Take it apart and put it back together and check again, then report back. I have to get to bed but I'll check back in the morning. Maybe by then some of the "old regular" members will chime in... I hope! :3-
Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 25, 2013, 05:11:31 AM i check the cable the are plug OK
i unplug an plug again and nothing append Title: Re: IGT S+ hot pepper bill validator problem Post by: shortrackskater on July 25, 2013, 02:54:52 PM With the power off...open the door and just check connectors and look for any obvious things, like a small broken wire in the optics by the area where the BV is. Also, make sure the MPU is seated into the mother board. Where are you located?
Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 26, 2013, 04:31:34 AM i check every cable nothing . all the cable are OK
and I'm in France . i m a little bit lost ... Title: Re: IGT S+ hot pepper bill validator problem Post by: CVslots on July 26, 2013, 02:47:10 PM If you haven't changed anything in the machine lately (any parts, battery, game chips, settings), and this problem just suddenly occurred, then I would suspect 2 things:
-Remove and Clean your bill validator. Clean the optics, lube the gears, etc. -Pull MPU and check for bent pins and good battery. Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 27, 2013, 05:48:46 AM OK I'm going to try that this afternoon
Title: Re: IGT S+ hot pepper bill validator problem Post by: stayouttadabunker on July 29, 2013, 12:10:56 PM On your reel glass display, what numbers are showing?
Maybe there's a code that can help us to help you? Sur votre écran en verre de bobine, quels sont les numéros sont diffusées? Peut-être qu'il ya un code qui peut nous aider à vous aider? Title: Re: IGT S+ hot pepper bill validator problem Post by: fantillusion on July 29, 2013, 03:41:23 PM now it s OK i change the BV and it work perfectly
Title: Re: IGT S+ hot pepper bill validator problem Post by: shortrackskater on July 29, 2013, 03:43:36 PM Good to hear! :3-
|