Title: s-2000 set up after keying cpu Post by: azgamingslots on August 03, 2013, 03:31:08 AM working on a bunch of s-2000 that have communication failure, (failed since communication with casino internal software no longer exists after being pulled from the casino) i have to clear the cpu with a clear chip. and rekey with key chip,
however once keyed i need to set cpu back up, some have multi denomination touch pads in the reel glass. have tried keying and setting and keying and setting and setting and keying and setting, (seem to make a mistake and have to key and reset again) i could really use step by step procedure from start to finish, setting them up since, its a must to set percentages, game, multi denom all in order. does anyone have the step by step procedure? Title: Re: s-2000 set up after keying cpu Post by: Nurbo on August 03, 2013, 04:24:59 AM Hello,
The attached file was made by a member of the forum. I hope it can help you. Nurbo Title: Re: s-2000 set up after keying cpu Post by: Oscar Pompa on August 03, 2013, 04:36:52 AM Yeap, its really helpfull i downloaded the file few months ago and i did ram clear to 10 S2000 machines, i changed from TITO to coin operation. any doubts dont hensitate to ask.
Title: Re: s-2000 set up after keying cpu Post by: lindam1 on August 03, 2013, 09:54:50 AM If you have successfully done a clear, You should only have to use Key chip to set up now
Title: Re: s-2000 set up after keying cpu Post by: azgamingslots on August 03, 2013, 07:24:21 PM thank you so much, this will be helpful, one question, what if the machine has a multi denomination touch pad on the front of the reel glass? how do you program in multi denomination?
Title: Re: s-2000 set up after keying cpu Post by: cowboygames on August 03, 2013, 07:31:53 PM After the clear you will have to the accounting denom. As long as the machine has a mutidenom version chip and the correct hardware for touchpad operation you would then go into the key chip menu and set up the payback per cent for each desired denom, then go into player denom screen and set the individual demons. Be sure you set your accounting denom to be the same or lower than the lowest desired player denom option
|