|
Title: Button Wiring Help needed Post by: idylewild1 on August 03, 2013, 09:25:20 PM A friend has gotten the wires on all the buttons moved to the point where no one knows which wires goes where. This is a 701 fortune 1 draw poker machine. The buttons from right to left are:
DEAL/DRAW PLAY 5 COINS HOLD/CANCEL HOLD/CANCEL HOLD/CANCEL HOLD/CANCEL HOLD/CANCEL BET ONE CREDIT COLLECT WINNINGS If someone could tell me which color wire goes where or take some very clear pictures it would save a ton of time to trace out each wire etc. Thanks in advance for any h Title: Re: Button Wiring Help needed Post by: Amachanic on August 04, 2013, 01:00:10 AM I think I have a fortune 1 out in my shed.. I'll see if I can get a clear picture tomorrow..
Gary Title: Re: Button Wiring Help needed Post by: idylewild1 on August 04, 2013, 11:22:10 AM Thanks
Title: Re: Button Wiring Help needed Post by: Amachanic on August 04, 2013, 02:42:50 PM Well I tried to get a pic of the wiring, but I can't see the back of the buttons.. Mine looks like it's a ribbon cable that goes through a whole on the front door.. I'd have to figure out how to get the deck button panel off for a pic.. I took a couple of pics of my machine.. I don't know if it's the machine your looking for?
Gary Title: Re: Button Wiring Help needed Post by: idylewild1 on August 04, 2013, 03:54:46 PM The button panel is held on by four nuts on the back of the door. I don't know if the wiring is the same as the one I have the buttons are dual function i.e. hold/cancel etc. I sure appreciate the help. All the schematics I have found are for the single function buttons. Could be the same not real familiar with fortune 1's.
Title: Re: Button Wiring Help needed Post by: RiseLikeRa on December 03, 2013, 11:09:58 AM Machanic and Idylewild:
Machanic, as I was reading this older post I saw that you have an old Furtune 1, the same Joker wild that I recently purchased "in your shed'" Thats no place for a beauty like that. Is it working? If not, would you be willing to part with some parts? PM me if you are open to the idea. BTW Love your Bally EM's Idylewild: I did notice also that your buttons have a dual purpose. I have the older machine I guess where the hold is simply hold only. I would be interested in the wiring diagram that you have on these since I feel inclined to change my middle, 3rd card button socket. Thanks to you both Ra Title: Re: Button Wiring Help needed Post by: Amachanic on December 03, 2013, 01:26:55 PM Sorry... Recently traded the Fortune I for a Bally EM. Gary
Title: Re: Button Wiring Help needed Post by: Jim on December 03, 2013, 01:41:49 PM I have a set of schematics for the button assembly, will look for them this evening. Have three or four manuals for this machine.
Jim |