|
Title: Identification Help Post by: jzeller on August 13, 2013, 02:14:08 PM Hi,
I want to try repair my Bally EM slot machine. But there is a payout counter missing in the head section. So before I try source one, I need some help identifying what I need. All help appreciated. Regards, John Title: Re: Identification Help Post by: slotsteve on August 13, 2013, 04:38:22 PM let me guess your slot has been used out of the usa
Title: Re: Identification Help Post by: jzeller on August 13, 2013, 06:10:08 PM Yes, I live in South Africa. Research shows that a lot of these were made in Ireland?
Title: Re: Identification Help Post by: mark the spark on August 14, 2013, 01:58:13 PM at a guess your missing a changer and the one I had also had an insert 10p for 5 goes mech as well
Title: Re: Identification Help Post by: slotsteve on August 14, 2013, 02:05:30 PM I,ll say we have a winner
Title: Re: Identification Help Post by: jzeller on August 14, 2013, 05:56:11 PM Wow, thanks so much. Would you be able to send me a photo inside the top box? Also, what model Bally is this? I need to fix up the top box (not sure if mine was supposed to have coin inputs on the top, as it has it lower down, but still) and need to know what is missing and what it looks like.
Title: Re: Identification Help Post by: mark the spark on August 14, 2013, 06:44:07 PM ok on my old one which I no longer have top left was a 50p changer next was a 20p changer and last was a 5 goes for 10p
Title: Re: Identification Help Post by: mark the spark on August 14, 2013, 06:45:49 PM this is what was fitted on the right side of the top box which is the 5 goes for 10p controller
Title: Re: Identification Help Post by: mark the spark on August 14, 2013, 06:54:14 PM front view
Title: Re: Identification Help Post by: jzeller on September 09, 2013, 02:51:27 AM You are a star!!! Thanks so much. Now to try source the bits....
|