|
Title: Bally 5000 Hopper Wiring Post by: harp on September 03, 2013, 08:23:34 PM Hi guys, need some assistance with a Bally 5000 Hopper, not the 5000plus or the 5500 but the first version 5000
Helping out an industry friend who had an issue, whilst troubleshooting he stripped down the Hopper, he called me and I got the machine up and running for him, now I need to put the Hopper back together Of all the Bally Manuals I have, I don't have the 5000 Manual Coming from the Backplane Board is a Ribbon Cable using 7 wires, 2@ Motor, 2@ Count Switch 2@ Over Flow Switch and 1@ 5v The question is, where does the 5v wire connect? Thanks for any assistance Harp Title: Re: Bally 5000 Hopper Wiring Post by: Neonkiss on September 03, 2013, 11:26:33 PM See if this helps
Title: Re: Bally 5000 Hopper Wiring Post by: harp on September 04, 2013, 07:47:21 AM Also have the same diagram, however it does not help
Looking to find out where the 5v line connects Title: Re: Bally 5000 Hopper Wiring Post by: TZtech on September 04, 2013, 08:29:36 AM The manual I have has a different wiring diagram. Looks like Pin 4 of J10 and Gnd on Pin 5.
Full manual is 10M - PM me if needed |