|
Title: How to install a knock off switch to a standard Cherry Master machine Post by: BR549 Auto Sales on September 04, 2013, 12:29:09 PM I'm guessing that there are two wires on the Cherry Master harness that I cab wire a micro switch button to in order to dump the credits on the machine, can someone tell me which two they may be.
Thanks, David Title: Re: How to install a knock off switch to a standard Cherry Master machine Post by: Ron (r273) on September 04, 2013, 12:47:48 PM I'm guessing that there are two wires on the Cherry Master harness that I cab wire a micro switch button to in order to dump the credits on the machine, can someone tell me which two they may be. Thanks, David Mine has a toggle switch recessed on the back of the cabinet to do this, if this helps. Ron (r273) Edit: Mine is wired from the push button switch in the back with a black and a white wire with black stripe. The black wire runs to the push button panel in the front and hooks in to the button grounds. The white with the black stripe changes to a gray with a red or burgundy stripe that runs to the main connection to the CPU. Title: Re: How to install a knock off switch to a standard Cherry Master machine Post by: asgard on September 07, 2013, 12:30:30 AM Pin 21 on the solder side of edge connector and any ground.
Title: Re: How to install a knock off switch to a standard Cherry Master machine Post by: BR549 Auto Sales on September 07, 2013, 01:17:31 PM thanks guys. I will give it a whirl.
|