New Life Games Tech Forums

Hi bought the machine a few months ago done a few minor repairs myself all fine but when I think I'm done I put a coin in and it drops strait Through coin me chanism light is on maybe I haven't got it wired up properly has any1 got a wiring and diagram for this machine or can tell me how to make it not need coins for the moment and to clear the wins it has 352 credits when you turn the jackpot key? Any ideas would be greatly appreciated thanks

Recently purchased this 1992 igt double pay s slot has 5xlines bet and 5x reels never seen  befoer and have had no luck finding anything similar so I can do the repairs... any help appreciated will upload more pics etc..    I put a coin in and it drops strait to the cash tray on the front and am unable to have a play on the machine it does have 352 credits on the display atm maybe it needs a handpay???

This looks like some sort of skill stop machine or some sort?  I can't read what the display says, it's too blurry.  When you open the door and look at the coin comparitor, is there a coin in it?

I'm pretty sure that's an Australian S+ or IGT's equivalent to it.

I'm guessing it's Australian. Are you sure it's an "S" model?

There was a coin in it but took the old coin comparitor apart and have found a blown resistor.. I have bought a cpu comparable coin mech would that be suitable for the machine?  And yes its australian thanks every1 for help.. Im sure its an 's' slot but I did find a second pubs/clubs act plate inside thw machine loose it has different serial numbers will upload pics of both and the coin mechs I have here TY every1

Pics of the 2x serial number plates.   :103- :103- :103-

Pics of original coin comparitor  inside and out

New coin comparitor can this be used or fix up the old 1 and how do I wire the loom from either old coin comparitor or new 1 thanks.  I only have a yellow , black and a red wire coming from the loom free and the red wire looks like its attached to the blue wire coming from the loom.. Can upload more pics if needed thx for any help in advance, will put more pics of the display up now thx

Pics of top diplay

More pics of top display this is without the coin comparitor in as I can't get the thing wired up properly..  Thx every1

There are a lot of coin comparitors, you need to get the exact same model for your machine, otherwise it won't work.  They have different protocols and voltages, if it doesn't match up to your machine, it will not work.

Thanks, this might be a stupid question but my machine says its 240v throughout machine so will I need a 24v coin comparitor like this 1 on the link.    http://na.suzohapp.com/gaming_products/coin_currency_supplies/35-0016-00?SS=ON.       Or can I get away with buying this and putting it in my old coin comparitor http://na.suzohapp.com/all_catalogs/coin_currency_supplies/35-0034-00...   And also this cord with it if I buy that can any1 show me how to connect it up don't have the 3 wire port someone cut it off I have what is in the pic 5pics upwards...  This is the cord.. Also if u no of any cheaper comparitors let me no thanks http://na.suzohapp.com/all_catalogs/coin_currency_supplies/35-0230-00

If someone can please help me get this sorted out I will make a donation on Monday... Or pay u for making me a harness from door to coin mech/diverter/cc optics and door optics  will upload pics of the harness I need or if u can assist me with re-wiring it.. And also il put pics of the machine up....
Thanks in advance

1st pic is the machine
2nd pic is the harness I'm after it has the 5xoutputs from the big 12pin moles plug at the back of my hand it's missing the 3pin molex for the coin comp....

 I have read through a zillion posts and still can't make sense of this pretty please help me