|
Title: Need help with my chip reader/burner for a MC250 message change Post by: Big Ed Deline on September 11, 2013, 11:40:31 PM Guys, I really could use some help.
I bought a GQ-4X burner to change the message in my Mastercom 250. I figured It would be as easy as reading the chip, editing the file, and then burning it back. However I cant find the original message any where in the chip read. The current message says something like "Welcome to Caesars Palace Atlantic City Please insert your total rewards card". however I cant find any of that in the chip read. Any advice is appreciated. Title: Re: Need help with my chip reader/burner for a MC250 message change Post by: proten on September 12, 2013, 01:46:08 AM If you didn't select the right size-type chip then you won't
get all of the file. Title: Re: Need help with my chip reader/burner for a MC250 message change Post by: Big Ed Deline on September 12, 2013, 02:26:42 PM If you didn't select the right size-type chip then you won't The scan does save as a 512k file so I think I am getting it all. get all of the file. Title: Re: Need help with my chip reader/burner for a MC250 message change Post by: Foster on September 12, 2013, 09:28:38 PM Some of the Bally Mastercom 250 messages seem to be encrypted.
:172- It should make it easier for you. Title: Re: Need help with my chip reader/burner for a MC250 message change Post by: Big Ed Deline on September 13, 2013, 01:15:58 PM A big thanks to a couple of you guys out there!!! NLG comes through again.
I was able to get my Mastercom 250's up and running with the message that I wanted. You guys are awesome!!! |