Title: S+ possible to have backlit reels? Post by: BBH213 on September 16, 2013, 10:50:06 AM Does anyone know if it is possible to have backlit reels on an S+ ?
If this has been covered on here before, sorry. Thanks! Title: Re: S+ possible to have backlit reels? Post by: cowboygames on September 16, 2013, 12:56:05 PM Not unless you can do a custom job where the lights are controlled by a switch. S+ doesn't have anything to run them the way S2000 does as far as being controlled by the game software
Title: Re: S+ possible to have backlit reels? Post by: angryninjas on September 17, 2013, 08:43:31 AM A switch might be kind of cool. Of course all 9 bulbs would have to be on, all the time. Will S2000 reels fit the same connectors as an S Plus? In other words, can we buy a set of S2000 backlit reels, plug them into the EXISTING reel connectors of our S Plus, and wire the bulbs together to a switch? If so, any ideas as to a nearby location where we can tap into the proper voltage to run the 9 bulbs? I just paid big bucks to have a custom kit silk screened onto glass, and custom backlit reel strips made, and would be nice to be able to show off my custom backlit strips in my S Plus machine. I just assumed I'd lose out on the backlit functionality that I paid dearly for (didn't have a choice of non-backlit). It cost me over $500 to do the top glass, bottom glass and 3 backlit strips made up the same way that IGT does the factory ones. It would be nice to see all the features I paid for, lol.
Title: Re: S+ possible to have backlit reels? Post by: BBH213 on September 17, 2013, 10:48:14 AM Nicely summarized Ninja!
I guess I was hoping for a "plug and play" backlit reel option for the S+. Title: Re: S+ possible to have backlit reels? Post by: rickhunter on September 17, 2013, 01:38:10 PM No the reels use different connectors. On the S2000's the reels connect at the rear of the shelf, on the S+, it plugs in through the bottom of the shelf. The other issue is that the S+ baskets do not really allow for a backlight to be installed anywhere on it, because the whole assembly spins. On the S2000 reels, only the outer part spins, the lamp assemblies do not move.
Title: Re: S+ possible to have backlit reels? Post by: BBH213 on September 17, 2013, 02:58:44 PM Thanks!
I guess I will just have to buy an S2000 machine now! |