|
Title: Bally's Super 7 Continental problem with machine Post by: harleygirl on September 21, 2013, 05:38:50 PM :279-I have a Bally''s Super 7 Continental 2214 4 reel machine. Was having intermittent problems nothing too bad, would work then stop, then start working again. Now the credit light and front panel lights (front buttons and tilt, coin accepted insert coin, etc) are not lit and the machine will not accept any coins. Anything ideas? I did remove hopper and reels and looked to see it anything was out of place or touching something it shouldn't. Also, where is a good place to get manuals on these types of machines? Any help would be great.
Title: Re: Bally's Super 7 Continental problem with machine Post by: tkrozleski on September 21, 2013, 09:49:48 PM Could be the power supply board which is mounted on the inside lower back wall behind the hopper. The wire harness connection pins at the PS board may need cleaning and/or resoldered joints.
I may be off base here in my response? Is this a Bally E2000 series ? If this a video slot ? Title: Re: Bally's Super 7 Continental problem with machine Post by: Styx on September 21, 2013, 10:41:03 PM Is it giving any error codes? Maybe the machine is in a tilt and isn't in play mode. Maybe a door has been opening and closing, and is now just open?
-Styx Title: Re: Bally's Super 7 Continental problem with machine Post by: harleygirl on September 24, 2013, 04:39:12 PM Thanks everyone. No error codes. The main lights come on only. It is like it is getting only partial power. No tilt light or coin light. Door seems to be doing the same as always, the lights to not restore when door is closed. It is an E2000 series machine.
Title: Re: Bally's Super 7 Continental problem with machine Post by: tkrozleski on September 24, 2013, 07:12:07 PM Try reseating the wire harness to the powersupply board
|