|
Title: S6000 need to avoid ticket printer error (36) Post by: lindam1 on September 22, 2013, 10:20:20 PM I have some S6000's with no hopper and no ticket printer. After a ram clear and setup, if you Cash Out you get an error 36 cause it's looking for the ticket printer. Are there any setting, either with the dip's or in the 11d menu that I'm overlooking that will send a Cash Out to hand pay on the first payout?
Thanks Lindsay Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 22, 2013, 10:27:24 PM If I recall when I set some up that way I set 61 to 1. 81 to 1. 64 to 0 & make sure jumper is in where hopper plugs in.
Hope I'm right Title: Re: S6000 need to avoid ticket printer error (36) Post by: lindam1 on September 22, 2013, 11:06:47 PM Ford,
You could be on it. 61 might be the key. I have my hopper jumper in, but I've been setting 61 on 2. I'll try it tomorrow. Thanks Lin Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 22, 2013, 11:08:51 PM Hope I'm right, It's been a few years since I did that. It's a place to start.
Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 24, 2013, 01:18:58 PM Did you get it working?
Title: Re: S6000 need to avoid ticket printer error (36) Post by: lindam1 on September 24, 2013, 07:58:26 PM Ford,
This is the setup for a 6000 With NO Hopper and NO printer. It will goto hand pay on every cash out 54- 0 56- 0 51- 9999 58- 9995 73- 0 61- 2 81- 0 67- 0 67 is the most important. Lin Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 24, 2013, 08:36:23 PM Ford, This is the setup for a 6000 With NO Hopper and NO printer. It will goto hand pay on every cash out 54- 0 56- 0 51- 9999 58- 9995 73- 0 61- 2 81- 0 67- 0 67 is the most important. Lin Thanks. This time I'll save info. so I have it on file. Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 24, 2013, 09:07:59 PM L, what are you using to put credits on? One of Johns units?
Disregard, I thought you were not running bill acceptor also. When I did it I eliminated printer, hopper & bill acceptor. Title: Re: S6000 need to avoid ticket printer error (36) Post by: lindam1 on September 24, 2013, 09:18:22 PM B/V is still in machine. the reason I take out the ticket printer is that buyers see them and want them to work. rather then a 20 minute song and dance about chips and why they print once and not any more, It's easier to pull them.
Title: Re: S6000 need to avoid ticket printer error (36) Post by: FORDSBS on September 24, 2013, 09:23:21 PM I have TITO in all of mine. If they don't want TITO I pull them out.
|