|
Title: DBV-200 in a S+ that is not working Post by: Terry B on September 24, 2013, 10:01:09 PM Just bought an S+ which at start up does the usual coffee grinder prior to finishing boot up. After booting the machine plays just fine on quarters in and quarters out. The BV will not do anything. I know it has power as I can see the red LED's are lighted; bezel lights don't work (tested ok) and the "Play 3 credits" light does not work which also tests ok.
I replaced the whole unit and power supply from a know to operate machine. Still nothing. In fact I put the unit that came with the machine in my other S+ and it works just fine so I know it isn't the 200 causing the problem.Anyone have a next step please? Terry Title: Re: DBV-200 in a S+ that is not working Post by: cowboygames on September 24, 2013, 10:04:01 PM Is the BV enabled on the new machine? With denom set?
Title: Re: DBV-200 in a S+ that is not working Post by: Terry B on September 24, 2013, 10:23:21 PM Good question. The unit I replaced that I know works is also a quarter machine so I assume that the denomination is set. Perhaps the machine itself is not enabled? How do I check that?
T Title: Re: DBV-200 in a S+ that is not working Post by: therockinelvis on September 24, 2013, 10:50:56 PM Option 9 should be 9-1 to be working. Sometimes you can change it from 9-0 to 9-1 if you have NO credits on machine. If denom is wrong you will need a set chip
Title: Re: DBV-200 in a S+ that is not working Post by: Terry B on September 24, 2013, 11:11:30 PM I do have a set and clear chip so I will give that a try. Thanks so much.
Terry Title: Re: DBV-200 in a S+ that is not working Post by: therockinelvis on September 24, 2013, 11:13:43 PM You should NOT have to clear. Just set chip. Did you check option 9?
Title: Re: DBV-200 in a S+ that is not working Post by: Terry B on September 24, 2013, 11:34:35 PM I am presently trying to figure out how to get into the menu to check the settings which so far has been a daunting task. Will get back to you once i can see the setting.
T Title: Re: DBV-200 in a S+ that is not working Post by: therockinelvis on September 24, 2013, 11:47:00 PM Open door press test button until a 0 is in coins played and a 2 or maybe 5 is in won. turn jp key until it becomes a 9. 9-0 disable 9-1 is enabled
Title: Re: DBV-200 in a S+ that is not working Post by: Terry B on September 25, 2013, 12:51:31 AM Initially I was pushing the test button in a sequence the machine did not like; numbers flying randomly. I slowed down and behold I have 9 0 and 0 in the coins played. I am afraid to touch anything.Here is what I have:
1 lighted bet one credit 2 lighted play 3 credits 3 JP key 4 test button. Which one do I push? T Title: Re: DBV-200 in a S+ that is not working Post by: rickhunter on September 25, 2013, 02:04:30 AM http://www.newlifegames.net/spset/dbv.htm (http://www.newlifegames.net/spset/dbv.htm)
Title: Re: DBV-200 in a S+ that is not working Post by: Terry B on September 25, 2013, 02:09:28 AM Rick, Thank you...
Terry Title: Re: DBV-200 in a S+ that is not working Post by: rickhunter on September 25, 2013, 02:18:11 AM Glad u got it going.
Title: Re: DBV-200 in a S+ that is not working Post by: therockinelvis on September 25, 2013, 09:35:17 AM Sorry Terry. It was bedtime for me. Glad Rick got you going. I guess your set chip did not come with instructions.
|