|
Title: IPC - IGT Progressive Controller Post by: tacman on September 21, 2008, 02:19:12 AM Joeylc
IPC - IGT Progressive Controller. « on: February 22, 2006, 10:00:11 AM » -------------------------------------------------------------------------------- Looking for any and all info on the "IPC IGT Progressive System". Jay Re: IGT IPC Progressive System. « Reply #1 on: February 22, 2006, 10:39:24 AM » -------------------------------------------------------------------------------- I don't have any documentation but the thing was dead easy to hook up and configure. Most of what I needed to know was in the Set90 PSR. Plugs into the 15pin square connector in the top box. Works well with a 1271 and a Set90 chip. The Set90 provides for a variety of combinations of both Internal progressive and Link. Standalone, Nothing Standalone, Standalone Standalone, Link Link, Nothing Link, Standalone I am currently running the Con1 as my main progressive with the internal standalone as the second pay..... Depending on what you choose you then have 1 set or 2 set of configurable progressives. The values are: Base/Reset amount, %contribution, Max amount, Current Jackpot (not necessarily in that order). These also show up in the game chip self test (coin window=7) but you can't change them without going back to the set chip. The only thing that bit me .....was that since I was using this as a second level progressive I needed to move the display cable to the second port vs the first one. Joeylc Re: IGT IPC Progressive System. « Reply #2 on: February 22, 2006, 12:35:29 PM » -------------------------------------------------------------------------------- I don't think we are quite on the same page with this one jay LOL This is the new "IPC" IGT Progressive Controller. The (IPC) provides the operator with the ability to configure and run progressives on a bank of up to 63 machines. and IPC gives the operator the flexibility to arrange different progressives at selected locations and banks of machines. rickhunter Re: IGT IPC Progressive System. « Reply #3 on: February 22, 2006, 12:38:20 PM » -------------------------------------------------------------------------------- Quote from: Joeylc on February 22, 2006, 10:00:11 AM Looking for any and all info on the "IPC IGT Progressive System". You mean this??? -------------------------------------------------------------------------------- Title: Re: IPC - IGT Progressive Controller Post by: tacman on September 21, 2008, 02:21:46 AM Joeylc
Re: IGT IPC Progressive System. « Reply #4 on: February 22, 2006, 12:41:35 PM » -------------------------------------------------------------------------------- Yep thats it... thanks rick ... now any one have a copy of the setup software ???? Jay Re: IPC - IGT Progressive Controller. « Reply #5 on: February 22, 2006, 02:40:23 PM » -------------------------------------------------------------------------------- I thought IPC stood for something like ..... Internal Progressive Controller.... I will have the answer for the next person..... rickhunter Re: IGT IPC Progressive System. « Reply #6 on: February 22, 2006, 03:15:38 PM » -------------------------------------------------------------------------------- Quote from: Joeylc on February 22, 2006, 12:41:35 PM Yep thats it... thanks rick ... now any one have a copy of the setup software ???? Found these in my mess 'o files also Title: Re: IPC - IGT Progressive Controller Post by: tacman on September 21, 2008, 02:22:58 AM Super_user11
Re: IPC - IGT Progressive Controller. « Reply #7 on: March 31, 2008, 10:45:36 PM » -------------------------------------------------------------------------------- wow.. RickHunter.. you da man... been lookin for those files for a while now.. Title: Re: IPC - IGT Progressive Controller Post by: Thor777 on September 21, 2008, 02:36:48 AM Super_user11 Re: IPC - IGT Progressive Controller. « Reply #7 on: March 31, 2008, 10:45:36 PM » -------------------------------------------------------------------------------- wow.. RickHunter.. you da man... been lookin for those files for a while now.. Good Karma...thanks for the help locating the vision software |