|
Title: Reel Touch start up Post by: keystone9 on September 28, 2013, 09:04:02 AM I am shopping out a few Reel Touch games and on start up the top monitor says "Warning CPU has been changed, Please enter CPU speed, CMOS setup and remember to save before exit". Can any one tell me what this is and the way to correct it? Thanks. Bill
Title: Re: Reel Touch start up Post by: idesign on September 28, 2013, 12:00:58 PM Hook up a computer keyboard up to it and reset the BIOS parameters.
Title: Re: Reel Touch start up Post by: keystone9 on September 28, 2013, 02:48:59 PM I can do that with the keyboard. Any settings I should follow? Thanks. Bill
Title: Re: Reel Touch start up Post by: idesign on September 28, 2013, 02:53:30 PM i think you can just use the default settings
Title: Re: Reel Touch start up Post by: rickhunter on September 28, 2013, 03:02:54 PM Yes, the bios will detect the correct cpu and auto-configure. If you lost that configuration your cmos battery is low. Should replace that one as well.
Title: Re: Reel Touch start up Post by: idesign on September 28, 2013, 03:07:09 PM I forgot about that. If the battery is low or dead your settings will not be retained.
Title: Re: Reel Touch start up Post by: keystone9 on September 28, 2013, 03:09:24 PM Ok. I will replace the battery. Thanks
Title: Re: Reel Touch start up Post by: keystone9 on September 30, 2013, 06:07:32 PM Ok I got the game past the first issue and now the top display is just locked at (RFA20001) Dig. It just keeps scrolling every few minutes like it's looking for something that is not there. The front display will say Verify Error. Thanks. Bill.
|