|
Title: Enhanced board question. Post by: Jimise on September 30, 2013, 12:08:42 AM I have an enhanced board that I am going to use the S2000 enhanced memory board on.
Setting it up looks like it wont be a problem. (Regular 5 reel, 9 line game display Bottom picture) My question is about the display on the reel glass, do I need to change out the display? Or will it work correctly with the memory board? (It is for a 20 line game Top picture is what is in the machine) Also if I change out the reel glass, it would not match the 20 line display.... Thanks everyone! Title: Re: Enhanced board question. Post by: CVslots on September 30, 2013, 12:58:59 AM I'm completely confused, and I've read your post like 11 times. Sorry, it's been a long week I guess. Are you going to a 9 line game or a 20 line game??? I understand top pic is what's in the machine now, but not sure what you're changing to. If you're going to a 9 line game, the top pic display will not work (as far as I know anyway).
Title: Re: Enhanced board question. Post by: Jimise on September 30, 2013, 01:33:03 AM I was afraid of that :25- It looks confusing to me too :96-
Ok, I have a TL7s 5 reel 20 line machine with the enhanced board with the "R" board installed. I want to remove the "R" board and install one of the memory boards / daughter boards that you use the chips and sound simm on. So I will be going from a 20 line game, to a 9 line game. I am wondering if I can just switch out the display from the 20 line one to a 9 line one? I'm sure someone out there has done this before :89- Thanks! I'm completely confused, and I've read your post like 11 times. Sorry, it's been a long week I guess. Are you going to a 9 line game or a 20 line game??? I understand top pic is what's in the machine now, but not sure what you're changing to. If you're going to a 9 line game, the top pic display will not work (as far as I know anyway). Title: Re: Enhanced board question. Post by: rickhunter on September 30, 2013, 01:53:05 AM Yes you can. You need to have an 802 board on the door I/O though, the one that faces the hopper, at least that is the case with my setup. I'm assuming there's a molex connector connected to the current display board that goes to this door I/O card.
Title: Re: Enhanced board question. Post by: Jimise on September 30, 2013, 02:05:31 AM Great, Thanks for the reply!
Yes There is a connector for the current display (20 line) , and the 9 line display connects as well. I will check out the I/O card on the door. Thanks again! Yes you can. You need to have an 802 board on the door I/O though, the one that faces the hopper, at least that is the case with my setup. I'm assuming there's a molex connector connected to the current display board that goes to this door I/O card. Title: Re: Enhanced board question. Post by: idesign on September 30, 2013, 10:26:51 AM You can leave that display in there if you like. It will reconfigure itself to 9 lines instead of 20.
Title: Re: Enhanced board question. Post by: qbert on September 30, 2013, 04:57:18 PM Your current display will work fine with a 9 line game. I have 9 line games with both types of displays. I do have 802 boards in each one's door I/O board
Title: Re: Enhanced board question. Post by: Jimise on October 02, 2013, 01:25:39 AM Ok, My game is up and running! I just left the 20 line display in the machine for now.
Thanks everyone for the help! :3- K+ Jim. Title: Re: Enhanced board question. Post by: CVslots on October 02, 2013, 02:32:59 AM Is the display working fine? Just wondered, from the way you put it, wasn't sure.
Title: Re: Enhanced board question. Post by: Jimise on October 02, 2013, 02:53:23 AM Hi Roz,
Yes it works just fine. I just wanted to check with the experts here on NLG so I don't mess anything up (no smoke....) :89- It was really easy to set up, put in the chips & sound simm, turned on the machine, turn the key, hold down the button, close the door, up and running. Looks like I need to get a different version chip this is only a single denom, and the scrolling message says insert tokens. At least it is working........ Thanks everyone! Jim. Is the display working fine? Just wondered, from the way you put it, wasn't sure. |