|
Title: Bally S600 MPU causing 20 coin in jam error Post by: montech on October 15, 2013, 08:09:15 PM Hello
I looked at Belbenchtechs log but didn't see this one. Anyone know what can cause a code 20 on this board? AS-0278970. Title: Re: Bally S600 MPU causing 20 coin in jam error Post by: Mr. Dinoman on October 16, 2013, 12:52:14 PM Check the coin drop optics below the coin comparitor...I sometimes find that dust or little spider webs like to collect in the holes...This will cause a error 20...If all is clear, you might need a new optics board...I just got one from John at Rudy's Deals...Hope this helps...
Jimmy Title: Re: Bally S600 MPU causing 20 coin in jam error Post by: montech on October 16, 2013, 03:04:14 PM Thanks Jimmy
Actually this is a logic problem on the MPU board. I have swapped both boards from 2 Winning Times and the problem always follows the board. Just looking for a IC to change . Or maybe someone could chime in for board repair? Title: Re: Bally S600 MPU causing 20 coin in jam error Post by: Mr. Dinoman on October 16, 2013, 05:51:58 PM OK...Good to know....Do you get a credit when you push the test button on the optics board?
Jimmy Title: Re: Bally S600 MPU causing 20 coin in jam error Post by: montech on October 16, 2013, 09:35:37 PM Jimmy
Tell you the truth I didn't try it. I just put in another board in the machine to repair it and deliver it. I guess Ill put it with other boards I'm trying to get repaired.Any still fix V7000 or V7200? |