New Life Games Tech Forums

Hey all ... I have an older Pioneer Rose Flash Pachislo machine that I need a door lock for. It looks like the lock itself comes out of the latch assembly by pushing in on 2 pins held in by spring tension. Does anyone have a line on where I might find a lock?? I can send pics if need be.... also, I know some may suggest the want ads on this board, but I thought that I might have a better chance on this board. Thanks for your time!! Timm ......... :99- :99- :137-

Don't know if this is what you need.

http://www.ebay.com/itm/Slot-Machine-Parts-Pachislo-Door-Lock-and-Key-/281192120437?pt=LH_DefaultDomain_0&hash=item41785b4075 (http://www.ebay.com/itm/Slot-Machine-Parts-Pachislo-Door-Lock-and-Key-/281192120437?pt=LH_DefaultDomain_0&hash=item41785b4075)

Ron (r273)

we still have some here they cost us from  japan $25  each and there are so many different  type it hard to tell what you have or need the one on ebay  looks home made

Ron, the one on Ebay is not the one .... Steve (and everyone else), I will post a picture later tonight from home (I'm at work right now). Thanks Guys !!! :131- :131-

Here's 2 pics of the lock I need .....

Here's 2 more ...

you can pop the back off that lock so any ace key will work, once you pull out the 7 or 8 brass pins

Steve, that has already been done. The problem is the spring loaded pins that hold the lock assembly into the tube are bad/gone. I need a new (or used) lock. Thanks for your input!!  Timm .......

where the 2 pins come out of side of lock  get small screws  into them so it stays in tube of lock and them file off heads of screws so they will fit in door  we did that with 1/2 of our locks some locks you can not buy or find keys for

Good idea Steve !!  :244- :244- I never even thought of that!!  :131-  Gotta find my damn reading glasses first  :186- Timm ........

most here are here to help out others god knows I have been treated well and want to repay ,by  helping  others when I can

Steve, would you happen to have a lock cylinder (or assembly) like the one in my posts above?? If not, do you know of a good place to look?? I tried you idea (used 2 roll pins) and it worked good, only to find out that the cylinder it self is worn out. Thanks!!!  Timm .....

let me see what I have laying around  we have pickup going out next  3 days , I might have time on tue