New Life Games Tech Forums

Bill Validators and Currency acceptors => JCM DBV-45, DBV-145, and DBV-200 Bill Validators. => Topic started by: Dennoman on October 21, 2013, 08:16:47 PM



Title: DBV-200 Runs Constantly until I put a bill in
Post by: Dennoman on October 21, 2013, 08:16:47 PM
I have a Bally S5500 machine and when I turn it on the bill Validator runs constantly. At first I thought it was the unit so I replaced it with a new one and the new one does the same. I've cleaned all the lenses and it's been upgraded to accept the new colored bills. The only way to get it to turn off is to put a bill in it and it will accept it half way and turn off. Won't register the bill or anything. I do get an error 24 message on my machine, but I think that is for either the optics board or coin comparator unit.


Title: Re: DBV-200 Runs Constantly until I put a bill in
Post by: Dennoman on November 02, 2013, 03:23:53 PM
I figured out why it did this. I had to have the Cash Can and the bill compressor unit installed. Now it goes through it's cycle and stops. Hope this helps someone.