|
Title: Bally S6000 Double Jackpot Blazing $7$ Post by: Spinage on October 24, 2013, 12:51:10 AM Hello,
I have purchased leave-in-mails for my S6000 slot machine from JJ Slots. I have a question: 1. How do I use these? If I want to do a full reset do I just press test and pseudo coin? Or are there jumpers I need to change? I did buy the dip switch from him, but wasn't sure if it was needed. Looking at the board I can not find where to plug it in. Thank you, Bill Title: Re: Bally S6000 Double Jackpot Blazing $7$ Post by: CVslots on October 24, 2013, 02:54:39 AM Ask JJSlots. He should be able to help you.
Title: Re: Bally S6000 Double Jackpot Blazing $7$ Post by: DF777 on October 24, 2013, 10:45:49 AM You need to download the Bally 6000 manual on this site under NLG File System "Downloads"
You will find all the info you need including diagrams of the MPU and dip switch settings. Print out the set up pages for future reference.Start off with a new battery.Have fun! Title: Re: Bally S6000 Double Jackpot Blazing $7$ Post by: coorslight115 on October 25, 2013, 01:08:51 AM SafeRAM™ Clear Proceedure
A SafeRAM™ Clear erases information stored within battery-backed random access memory (RAM). A Complete SafeRAM™ Clear is essential before the first use, when EPROMs are changed, or if game memory becomes corrupted. There are three levels of SafeRAM™ Clear: • Complete — Erases and reformats SafeRAM™. Game options are restored to factory default. All counters (soft meters) reset to zero. • Full — Resets all counters to zero except the SafeRAM™ Clear counters. Game options are restored to factory default. • Partial — Zeros all counters except SafeRAM™ Clear. All game configurations defined by DIP switches, jumper selections and game options are preserved. For a Complete, Full, or Partial SafeRAM™ Clear, turn the machine power OFF. Unlock and remove the MPU assembly. If SafeRAM™ Clear EPROMs are required, remove the Main EPROMs from U28 and U43 and replace them with the corresponding clear chips. If EPROMs are not required, turn DIP DS1 sw8 ON. After ensuring that the MPU assembly is firmly seated into the backplane board, turn the machine power ON while depressing the appropriate buttons. Complete - Press and hold the PSEUDO COIN and TEST buttons, then switch power ON. When the message CH C displays in WIN PAID, release the PSEUDO COIN and TEST buttons. The CH C message is followed by CL C. Full - Press and hold the PSEUDO COIN button, then switch power ON. When the message CH F appears in WIN PAID, release the PSEUDO COIN button. The CH F message is followed by CL F. Partial - Switch power ON. The message CH P displays in WIN PAID. The CH P message is followed by CL P. If an error was detected during SafeRAM™ Clear as designated by E C, E F, E P in WIN PAID, repeat the operation. Upon a successful SafeRAM™ Clear, the button and tower lamps flash. Switch power OFF and replace the SafeRAM™ Clear EPROMs with the Mains, or turn DS1 sw8 OFF. Replace the MPU assembly and switch machine power ON. The machine will enter a Reel Calibration Procedure whereby the home position is recorded in SafeRAM™. For tilt-free operation, it is important that the procedure completes without interruption. Real Time Clock (RTC) If U53 is populated with a Dallas Timekeeper IC, an opportunity to change the settings occurs after a Complete SafeRAM™ Clear. Set the date using the SPIN button to increment the number in the flashing field (mm/dd/yy/day-of-the-week; 0=Sunday) and the BET MAX button to move to the next field. Set the time (hh/mm/ss) using the same method as the date. Press CHANGE to confirm changes and exit. Then go into 11D and set options to match your conditions. |