|
Title: Illuminated Bill Strips (IGRAPHICS) Post by: therockinelvis on November 01, 2013, 11:54:23 PM We lost all our info. on these. Someone had posted pictures of how to wire them to the bezel harness if led board was installed and also to denom. light if led also. Pictures were posted of the Jumper inside unit also for making it stay on. If you could help us all out it would be great. Thank-ya-thank-ya-very-much
Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: Jimise on November 02, 2013, 01:50:35 AM Here is the pic of the wiring
http://newlifegames.net/nlg/index.php?topic=11853.0 (http://newlifegames.net/nlg/index.php?topic=11853.0) Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: Jimise on November 02, 2013, 01:57:02 AM A couple of links.
http://newlifegames.net/nlg/index.php?topic=12631.0 (http://newlifegames.net/nlg/index.php?topic=12631.0) http://newlifegames.net/nlg/index.php?topic=10142.0 (http://newlifegames.net/nlg/index.php?topic=10142.0) Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: knagl on November 03, 2013, 05:09:54 PM Jumper pictures:
http://newlifegames.net/nlg/index.php?topic=3275.msg33257#msg33257 (http://newlifegames.net/nlg/index.php?topic=3275.msg33257#msg33257) Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: therockinelvis on November 03, 2013, 10:21:22 PM Thanks to Jimise and Knagle :259-
Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: smileman83 on November 03, 2013, 11:38:37 PM I to lost this thread as I was trying to find out how to add to a game king. I can run the cables and I did splice into the 4 wire harness ( red wire and yellow with black), but power to the unit is potentially an issue. In the bottom left side of the game king ( Iplus) cabinet is a metal box with several plugs present. This is where the wall plug comes out of, so I would assume this is a power distribution panel. There is an open female plug that matches the male plug on the power cord from the power pac for this lighted bill strip, but when plugged in there it doesnt come on with the BV light. Do I need full 120 for the power pac? Can i put a plug end on this or is there another source of 120 V power inside the unit. I thought I would splice in a plug and check to make sure it does work before I diasseble my wire splices and see if these are not correct.
any insight is helpful. Bruce Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: Jimise on November 03, 2013, 11:55:15 PM It plugs right into that. plug & play....
Title: Re: Illuminated Bill Strips (IGRAPHICS) Post by: smileman83 on November 04, 2013, 12:13:38 PM LOL- thats what i was afraid of. I guess my splices into the LED wiring of the BV must not be correct since it didnt fire up when the BV came on. I will disconnect the wires to the BV and move the jumper inside the power box and see if that corrects the issue. I was going to test with a DMM and see if there was current coming from that 3 prong port but if you say thats it, that should be correct.
|