Title: IGT Players Edge+ Boards (By Belbenchtech) Post by: SAT (aka GANDHI) on September 21, 2008, 02:41:29 AM PE+ MPU Boards...
Problem; No Video. Solution; Repl. U74. Problem; No coin-in to hard meter. Solution; Repl. K3 Problem; Monitor looks washed out. solution; Repl. Q21 (2N3905). Problem; Characters orange (no black or red). Solution; Repl. U76. Problem; Coin-in timeout, no door close, & no self test. Solution; Repl. C9 (for door close-self test), cleared RAM for coin-in timeout. Problem;Coin-in timeout. Solution; Repl. U12. Problem; Blowing 7V-5Amp fuse. Solution; Repl. CR26. Problem; Constant coin-in timeout. Solution; Repl. RP1. Problem; No hold #1. Solution; Repl. CR8. Problem; Screen scrambled. Solution; Repl. U69. Problem; Coin-in timeout, door open (no reset). Solution; Repl. CR25. Problem; Scrambled screen. Solution; Repl. U54 & U68 (these "feed" character generators). Problem; Solenoid buzzing. Solution; Repl. R26. Problem; Black screen. Solution; Repaired trace J2, pin 31. Problems; Hold buttons FUBAR. Solution; Repl. CR3, CR4, & CR11. Problem; Can't clear RAM (actually No door close.) Solution; Repl. CR25. Problem; Keeps blowing 5Amp fuse. Solution; Repl. CR25. Title: Re: IGT Players Edge+ Boards (By Belbenchtech) Post by: SAT (aka GANDHI) on September 21, 2008, 02:45:13 AM I'm not sure any of this will help... my original notes from a PE+ seminar I took before I was allowed to repair boards...
Title: Re: IGT Players Edge+ Boards (By Belbenchtech) Post by: SAT (aka GANDHI) on September 21, 2008, 02:47:11 AM PE+ EPROM Replacement Procedure;
|