|
Title: multi denom touchpad not working on the # 2 quardrant Post by: BR549 Auto Sales on November 12, 2013, 05:09:51 AM I just set up a multi denom touch pad on my Denver Duck and only #1, 3 and 4 are working, I get no response from #2.
I programmed all 4 denoms and assigned them a % and enabled all 4 in the 7.1 menu settings. I took the reel glass back off and visually checked the touchpad and it looks fine as does the 2 small harnesses for it, could I just have a bad touchpad? I have 2 machines with the same issue. Title: Re: multi denom touchpad not working on the # 2 quardrant Post by: cowboygames on November 12, 2013, 05:17:27 AM Toichpads seem to be extremely sensitive to battery, especially if you put the reel glass in without removing the vfd frame. Biggest issue I've found is damage to the legs of a little IC on the board. It seems the legs pull off the solder pads very easily. I've had some success resolderi g them, but not much. They're to small and I'm to old
|