|
Title: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 23, 2013, 09:24:16 PM Hello Does any one know what this is and how to fix it I put in a new game and it shows AVL media checksum error when I tested on burner all chips were the correct checksum any ideas Thanks
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: laneman on November 23, 2013, 10:22:31 PM Usually happens when the chips werent totally erased.
Try double the erase time you used last time and reprogram. What game is the software for?I may have it if you need it. Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 23, 2013, 10:24:35 PM It is lets go fishin and is 6 chips do I need an expansion board for this game thanks
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: laneman on November 24, 2013, 02:23:11 AM Dont need a expansion for that one.Only programs with more than six game chips.
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: proten on November 24, 2013, 05:15:27 AM I probability just needs to be cleared and setup.
Here is the clear and setup steps. Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 24, 2013, 05:32:13 AM Did you get my email proten
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 24, 2013, 05:47:15 AM Thanks for the help guys i did different chips and it came up no errors it was set chip 6:02:08 and system 1:03:03 When I setup my bill validator does not turn on is there a way to activate it any ideas thanks guys
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: laneman on November 25, 2013, 11:58:29 PM Heres my validator settings....
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 26, 2013, 12:36:55 AM when I turn on machine the validator does not even light up I switch in another machine and it powers on as soon as I start up. is it possible that the wire harness went bad Thanks
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 26, 2013, 12:42:14 AM here are the settings on my machine I don't have hopper or coin so this is set correct and voucher options I can not set higher than 1000 and no power yet
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: laneman on November 26, 2013, 12:59:09 AM Its not showing any doors open is it?
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 26, 2013, 01:18:11 AM Not that I know of but I will check its weird it worked a couple weeks ago
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: proten on November 26, 2013, 02:41:11 AM bondoexpress I'm not going to be any help, I have a different bill validators in both of my machines.
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 26, 2013, 02:53:58 AM Ok thanks for checking
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: harp on November 26, 2013, 08:46:12 AM Have you checked the Harness coming from the back of the BV Housing,
Check that it is not only connected, but that the connections are in the correct positions, it is very easy to connect the BV Harness to the Cabinet Harness the wrong way round Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 26, 2013, 11:21:31 PM I tried a wire harness from another machine and it starts right up so my guess is that the harness is bad does anyone know what wires go to the port for the bacc or know where I can get a harness there's a lot of wires to different areas thanks
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 29, 2013, 02:10:12 AM Everyone who helped i gave a k+ I worked on machines today and took every wire out and re did and now machine is working and validator takes money thanks again laneman, proten, harp
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: laneman on November 29, 2013, 02:11:11 AM Glad its working now. :)
Title: Re: Aristocrat Mark6 AVL MEDIA CHECKSUM ERROR Post by: bondoexpress on November 29, 2013, 02:14:52 AM I got 2 machines working I had Mav 500 mark 6 that when I got did not even work I did the same thing and found out there was no bacc wire going to board had extra parts made one and machine started also so it was a good thanksgiving to work on machines
|